P38 eka code

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

Dave123456

New Member
Posts
6
Location
Devon
Hi all
I've recently bought a p38 2001 4 ltr v8 it was working fine until Friday the key fob stopped working so unlocked with key then when I went to start, came up with alarm fault engine disabled, have got eka code worked fine started up all good but if you leave it locked or unlocked when you come back to it you need to use eka code as it forget the fobs so please any suggestions where to go first.
 
Hi how do I go about resync keys to car can I do it with a nanocom? If so were is best one to get and which model.
 
put the key in the door, press and hold the lock button. turn and hold in the lock position until the light stops flashing. repeat with the unlock button and turning to the unlock position
you might need to repeat a few times but you know its done when the central locking activates
 
kermit_rr said:
put the key in the door, press and hold the lock button. turn and hold in the lock position until the light stops flashing. repeat with the unlock button and turning to the unlock position
you might need to repeat a few times but you know its done when the central locking activates
Click to expand...
For that year model it should also sinc through the ignition barrel. If i am correct as mine is 2000 model and does.
 
You must log in or register to reply here.

Similar threads

DollyBird
Engine disabled, keys not working, tried the guide “Re-synching the Range Rover P38 diesel engine with the Solved - BECM using a Nanocom” no luck
Replies
9
Views
1K
DollyBird
DollyBird
feyniriel
P38 engine disabled for no reason, please help!
Replies
5
Views
948
pwood999
pwood999
F
2001 P38 2.5 Diesel EKA Via NANOCOM
2
Replies
35
Views
1K
Datatek
Datatek
300bhp/ton
P38A EKA woes....
Replies
16
Views
1K
Datatek
Datatek
awkwardbob
L322 Does the L322 use an EKA code ?
Replies
4
Views
675
kds
K
Back
Top