p38 colour coded bumpers

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
W

Willos

Active Member
Posts
521
Location
Huntingdon Cambs
I'm going to put colour coded bumpers onto my p38.
Have all the kit for paiting 2k. Were the original coded bumpers GRP or the same as they grey plastic ones just painted ?
Second hand ones are cheap enough to paint whilst still running around in the beast.
 
Are you sure as I think I've seen a cracked one that looked like splintered GRP.
Ta for the tip on the plastic primer. What did you use to disolve any silicone on the plastic ?
 
just about to do mine tomorrow, just give them a good rubbing down then plastic primer, undercoat then the paint. most of the ones you see with splits in are cos not done properly..
 
Mines epson green so its not going to stand out like a pimped machine. Going to do the grill in black metalic as it looks like cheap grey plastic at present
 
are you using base and 2 pack clear coat cos a few cans out of halfords will look turd,also degrease with your paint thinners or acetone,plastic primer is vital as allready posted,mop up your hole car with fine compound and polish hey presto the beast is fresh as a daisy
 
You must log in or register to reply here.

Similar threads

Rubberknees
P38 rear door window trims replacement
Replies
14
Views
1K
Rubberknees
Rubberknees
Montyjohn
P38A Should I put a modern touch screen radio in my car? [. . . . and other questions]
2 3
Replies
48
Views
4K
pwood999
pwood999
Montyjohn
P38A A couple of queries about rebuild EAS valve block
Replies
9
Views
685
Grrrrrr
Grrrrrr
F
My 2006 Freelander TD4 Commerical
Replies
8
Views
591
Andy Warren
Andy Warren
F
P38A EAS -prior minor issues then failure - no real accumulating indicators
Replies
15
Views
2K
kurtjohnson10
kurtjohnson10
Back
Top