P38 auto problems

gemsdad · May 15, 2009

confirm away o wize one

gavbriggs · May 15, 2009

i can confirm the validity of the info too!!

gemsdad · May 15, 2009

so can i coz mhm sed so

Dr W · May 15, 2009

gavbriggs said:
yeah get rave cd 2 here

theres other landrovers there too

you will need to mount the file as its a .iso file. let me know if you dont know how to do this and i can talk you through it. you can also burn the file to cd but again if youre not sure i can help you out with it!

(just like that john!!!)

Cheers for the help guys, currently downloading the enourmous file, no idea about 'mounting the file' but that's something to work out tomorrow.

Currently wondering if I should have stuck with the classic as seem to have a fair few problems with the new toy but I guess once I sort them out they should only come along one at a time or am I being very naive.

gemsdad · May 15, 2009

naive springs to mind,lol.

gavbriggs · May 15, 2009

ok, have a look at power iso, download it and then if your still stuck i'll run through it with ya tomozz

Datatek · May 16, 2009

Alcohol 120%, which can be downloaded free for a trial, burns Rave onto a CD very quickly and easily. Just Google Alcohol 120% and you will find the program. If you put Rave on a CD you can use it on any computer, I take my laptop and Rave with me when I travel, I'm that confident of the P38's reliability LOL

gavbriggs · May 16, 2009

when i eventually build the car pc it will have rave permanently mounted ready to browse!!! thats how confident i am, coupled with the eas software and cable, the lpg kit software and cable, internet and sat nav, there should be no problem situation i cant get out of!! hopefully!!!

Dr W · May 16, 2009

Found a free program that allowed me to mount RAVE so all up and working now.

I've got an old laptop so I think I'll load RAVE and the mount program onto that so I can take it to the car and read outside, might also use work facilities to print out the manual and stick it in a lever arch file ready for access and covering in oily fingers.

Speaking of oil any recommendations for the 2.5 diesel when I do a change on it (might as well if I'm doing the gearbox)

ipsos · May 16, 2009

As we are on the subject of oil changes and the like,apart from transmission oil and engine oil,what else should be changed on a DIY service?,did i see differentials raise it's head?

gavbriggs · May 16, 2009

anything with oil in mate will need changing(i havnt done mine yet cos its been fecked) engine, g/box, does tranny case need it replacing???, diffs!!

chillmts · May 16, 2009

Good to see i'm not the only one with this problem. I've downloaded the rave software but can't burn it . Will try the suggestions later today( children allowing). Thank's everyone

Dr W · May 16, 2009

I types in ISO mounting and google gave me a list of things, chose one near the top which said it was free but unsuported by microsoft, it gave a link and simple instructions on how to install. Job done and mounted permanently on my computer, might also stick it on my work laptop so when I'm bored at work I can figure out how I'm going to tackle the next job ha ha.

I did notice that RAVE manual had a section on maintainence so reckon that's a good place to start for the items that need servicing.

gavbriggs · May 16, 2009

rave is basically the bible for landrover, its what the lr fellas use.

i use power iso for mounting images, i'm familiar with it and it covers all my needs. there are many different products out there that will do the same job, its just preference ans in some cases cost!!

i'm a great fan of getting stuck in and seeing what happens, i usually consult the manuals for a brief outline of what to do but generally find wadeing in, both feet first, is the best method!!!!

Dr W · May 16, 2009

And then realising at the end when you put it back together you have 3 screws/nuts left over

gavbriggs · May 16, 2009

well if thats the case then obviously it didnt need the screws in the first place and its over engineered!!!

well at least until the engine falls out that is!!

i usually get a few zip bags and mark them with a brief discription and some kind of order i took em out! its not fool proof but it helps.

Dr W · May 16, 2009

Genius, zip bags are a mcuh better idea than the top of my tool box, the glove box, the door pockets, centre consol or all together in the footwell.

I must try that plan, being a bit more organised might help things go back together a lot quicker.

gavbriggs · May 16, 2009

you can also tape em together with masking tape and write on em!!

gemsdad · May 17, 2009

gavbriggs said:
when i eventually build the car pc it will have rave permanently mounted ready to browse!!! thats how confident i am, coupled with the eas software and cable, the lpg kit software and cable, internet and sat nav, there should be no problem situation i cant get out of!! hopefully!!!

wot appens when the battery is flat gav,both of em if you have the twin battery set up,p38s anorl.

Datatek · May 17, 2009

gemsdad said:
wot appens when the battery is flat gav,both of em if you have the twin battery set up,p38s anorl.

Twin battery setup? Where the heck is there space for another battery without ditching the spare wheel????

P38 auto problems

NOT BOTHERED.

Well-Known Member

NOT BOTHERED.

Active Member

NOT BOTHERED.

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

New Member

Well-Known Member

New Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

NOT BOTHERED.

Well-Known Member

Similar threads