P38 2.5 DSE Cold Start Problem

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I tried to scribe around the section as much as I could before I removed it. But like you said, it must be very sensitive to movement.

I dont suppose you know which way I would need to tap it in order to advance the fuelling?

Or would I be best to try and find someone who can run live data on it while its being adjusted?
 
GavinDavis said:
I tried to scribe around the section as much as I could before I removed it. But like you said, it must be very sensitive to movement.

I dont suppose you know which way I would need to tap it in order to advance the fuelling?

Or would I be best to try and find someone who can run live data on it while its being adjusted?
Click to expand...

Very sensitive its hit and miss I'm afraid you can't have live data unless its running can you .
That or pump of and get it calibrated on a injection specialist machine .
 
Yes thats true, well I guess ive got two choices then....

Tinker with it myself or strip it down and send the pump away for calbration :(
 
GavinDavis said:
I tried to scribe around the section as much as I could before I removed it. But like you said, it must be very sensitive to movement.

I dont suppose you know which way I would need to tap it in order to advance the fuelling?

Or would I be best to try and find someone who can run live data on it while its being adjusted?
Click to expand...

Moving the centre section back and forth increases or decreases the fuel it does not advance or retard it. You need to slacken slightly and tap back and forth until you get a rock steady 750 RPM idle with the engine warm. Then nip it up.
 
wammers said:
Moving the centre section back and forth increases or decreases the fuel it does not advance or retard it. You need to slacken slightly and tap back and forth until you get a rock steady 750 RPM idle with the engine warm. Then nip it up.
Click to expand...

I will definitely be doing this when I get the chance to. On a cold start....when I can finally get the thing to fire up, it idles at 800rpm. I take it from cold it should be revving at around 1000rpm?
 
GavinDavis said:
I will definitely be doing this when I get the chance to. On a cold start....when I can finally get the thing to fire up, it idles at 800rpm. I take it from cold it should be revving at around 1000rpm?
Click to expand...

Around 1100 RPM from cold. You have the centre section in the wrong place. That is your problem. You are not getting enough fuel for startup.
 
wammers said:
Around 1100 RPM from cold. You have the centre section in the wrong place. That is your problem. You are not getting enough fuel for startup.
Click to expand...

I will definitely have a go at adjusting the position of this very soon. Hopefully I will perfect its positioning. Hopefully it should be possible to do with the inlet manifold still in position?
 
GavinDavis said:
I will definitely have a go at adjusting the position of this very soon. Hopefully I will perfect its positioning. Hopefully it should be possible to do with the inlet manifold still in position?
Click to expand...

yes, but much harder

you need barbie sized hands
 
GavinDavis said:
I will definitely have a go at adjusting the position of this very soon. Hopefully I will perfect its positioning. Hopefully it should be possible to do with the inlet manifold still in position?
Click to expand...

Manifold off is the only way to do that. Unless you can paper your hallway through the letter box.
 
You must log in or register to reply here.

Similar threads

F
P38 DSE loss of power when driving
2
Replies
33
Views
1K
Mark Piercy
Mark Piercy
T
P38A P38 DSE Manual (non-EGR) No turbo boost
Replies
7
Views
657
Grrrrrr
Grrrrrr
J
P38A p38 EAS - immediate drop of pressure
Replies
11
Views
603
Mark Piercy
Mark Piercy
loonyspoony
Disco 1 300TDI No Start
2 3
Replies
41
Views
2K
loonyspoony
loonyspoony
Louis2.5DSE
P38A P38 DSE fires but won't start
2 3
Replies
58
Views
5K
BDC
B
Back
Top