P38A P38 2.5 diesel viscous fan rivets.

Datatek · 2025-01-19T08:10:36+0000

RangeRoller dt said:
The fulcrum tensioner? Largish screwdriver maybe - be gentle they can snap- trick is slow steady -straight (no twisting) - pressure then the elbow will release without wangling it. Snap that whole world of trouble

When you get the belt off check the idler pulleys by turning them by hand. Should be free with no grinding or excessive play

As above, no pry bar needed just a decent sized screw driver.

UnitLandy · 2025-01-19T17:12:53+0000

I presume you mean put the handle end of the screwdriver in. The gap through which you put your levering device through is pretty big. There seems to be "a lot" of tension on mine too. I know that's the whole idea but I'm terrified I'm forcing it the right way.

UnitLandy · 2025-01-19T17:13:25+0000

Or rather the wrong way...

Datatek · 2025-01-19T17:37:00+0000

UnitLandy said:
I presume you mean put the handle end of the screwdriver in. The gap through which you put your levering device through is pretty big. There seems to be "a lot" of tension on mine too. I know that's the whole idea but I'm terrified I'm forcing it the right way.

Blade end in, no way you would get the handle of a decent sized screw driver in there.

P38A P38 2.5 diesel viscous fan rivets.

Datatek

Well-Known Member

UnitLandy

Active Member

UnitLandy

Active Member

Datatek

Well-Known Member

Similar threads