Freelander 2 (LR2) P,A,S high pressure feed pipes
- Thread starter bannyboy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
You have to press the rubber cup shaped part up into the flexy pipe collar. It's best to clean out any debris with brake cleaner first.
I use a close fitting spanner behind the rubber collar, then tap it upwards with a light hammer. This normally separates the joint quite effectively.
I use a close fitting spanner behind the rubber collar, then tap it upwards with a light hammer. This normally separates the joint quite effectively.
How did it become missing?
You can use fuel pipe connection release tools, if you can find the right size.
