Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
As I was hoping to use it last summer, SO AM IHaven't you finished it yet? We are all waiting.....
I can’t see it being ready for this summer either at the moment.
Overnighter Camper Trailer Build
- Thread starter Bobsticle
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I can’t see it being ready for this summer either at the moment.
- Posts
- 9,098
- Location
- North Lincs
Hopefully you will get a spurt of enthusiasm and get it finished.....As I was hoping to use it last summer, SO AM I
I can’t see it being ready for this summer either at the moment.
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
Zero advancement recently what wiv everything else an all.
still playing catch up with vehicle maintenance and as usual losing the fight.
Still, I have been playing with an outside porch light to brighten up one’s return from squatting in the bushes that is quite amusing, oh and remember this.
My valvoline oil can. Well when it gets a bit ot, I sit in the shade and play with it a bit
It’s turning out quite nice for a Jerry can like storage box I’ll strap to the front.
Lined with glass fibre and an added drainage grate it’ll be handy for thinks like wheel chocks and outsidie stuff. It does have a bit of boot seal rubber round the top but I’m not counting on it being watertight.
still playing catch up with vehicle maintenance and as usual losing the fight.
Still, I have been playing with an outside porch light to brighten up one’s return from squatting in the bushes that is quite amusing, oh and remember this.
My valvoline oil can. Well when it gets a bit ot, I sit in the shade and play with it a bit
It’s turning out quite nice for a Jerry can like storage box I’ll strap to the front.
Lined with glass fibre and an added drainage grate it’ll be handy for thinks like wheel chocks and outsidie stuff. It does have a bit of boot seal rubber round the top but I’m not counting on it being watertight.
Last edited:
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
Or was it Silkolene, naa, that was for cleaning windows
Nuther wash. I’ll top coat it next then see if it needs distressing
Nuther wash. I’ll top coat it next then see if it needs distressing
- Posts
- 44,834
- Location
- East Dorset
Beat me to it!!looks pretty distressing to me already
But I do like it
J
and i love the way you have to lock up your fresh air with a padlock round your's!!
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
Fresh!
- Posts
- 44,834
- Location
- East Dorset
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
How weird. After all this time I sidestepped all other temptations and pulled the camp trailer thingy out of the lockup. Managed a couple of half days catching up to where I left off and managed to insulate and panel the roof.
Even got a coat of epoxy resin on the bare ply to slow any moisture ingress while I fill the joints and attack the walls.
As usual I’m back at work tomorrow so no progress for the next eight days but have made a promise to myself now the heap is at least up and running to get cracking again and break its back this summer.
Even got a coat of epoxy resin on the bare ply to slow any moisture ingress while I fill the joints and attack the walls.
As usual I’m back at work tomorrow so no progress for the next eight days but have made a promise to myself now the heap is at least up and running to get cracking again and break its back this summer.
LincolnSteve
Well-Known Member
- Posts
- 1,204
- Location
- Lincoln
Great to see the project on the go again. If only we didn't have to go to work we could make so much progress with the projects.
- Posts
- 44,834
- Location
- East Dorset
Don't you believe it, says a person 8 years retired who has yet to touch one of his projects.
LincolnSteve
Well-Known Member
- Posts
- 1,204
- Location
- Lincoln
Don't say that. I'm pinning all my hopes on retirement. 
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
My biggest issue is now getting some 8mm ply for the outside walls. None of the builders merchants are stocking anything like quality ply and are selling very expensive standard junk for the woodbutchers.
It has to be 8mm as I was going with Baltic Birch. Although not a traditional exterior ply it’s relatively light as opposed to marine ply and won’t delaminate. Some of the thin internal ply is already showing signs of blowing with only atmospheric moisture but that is mostly due to the delay in applying any finish and not having the insulation glued to it for rigidity. My fault.
Looks like I’m going to have to go online and have it delivered. The prices have gone through the roof anorl so my original budget is up the creek.
It has to be 8mm as I was going with Baltic Birch. Although not a traditional exterior ply it’s relatively light as opposed to marine ply and won’t delaminate. Some of the thin internal ply is already showing signs of blowing with only atmospheric moisture but that is mostly due to the delay in applying any finish and not having the insulation glued to it for rigidity. My fault.
Looks like I’m going to have to go online and have it delivered. The prices have gone through the roof anorl so my original budget is up the creek.
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
The reason it has to be 8mm;
When on the drawing board in the design and development department of Sticle Enterprises the sill/skirt was cleared for manufacture and engineered with a 8mm step so the cladding sits flush. It’s not completely accurate due to the CNC technicians and wavers a bit between 6 and 9mm. Which is completely in accurate as I am usually between sixes and sevens.
When on the drawing board in the design and development department of Sticle Enterprises the sill/skirt was cleared for manufacture and engineered with a 8mm step so the cladding sits flush. It’s not completely accurate due to the CNC technicians and wavers a bit between 6 and 9mm. Which is completely in accurate as I am usually between sixes and sevens.
LincolnSteve
Well-Known Member
- Posts
- 1,204
- Location
- Lincoln
Price rises are shocking at the moment. Wage rises don't seem to be keeping up.
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
Oh and I have a roll of Kevlar. Yes, Kevlar.
I’m going to laminate it on the roof once the joints are filled and faired. It’s had one coat of thin epoxy as already mentioned. Once flat and true it will have a second coat and while still green the Kevlar will be draped and epoxied on the top.
That’ll stiffen the monkey.
Before fitting the roof I used lengths of 2x1 to lift the structure down the centre. This should help it not pooling in wet weather. Or at the very least not sink and create a water storage facility.
I’m going to laminate it on the roof once the joints are filled and faired. It’s had one coat of thin epoxy as already mentioned. Once flat and true it will have a second coat and while still green the Kevlar will be draped and epoxied on the top.
That’ll stiffen the monkey.
Before fitting the roof I used lengths of 2x1 to lift the structure down the centre. This should help it not pooling in wet weather. Or at the very least not sink and create a water storage facility.
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
I’m of the opinion that timber exporters are holding back supplies due to the expected price rises. The more they hold onto exports the harder it becomes to buy the stuff and up the price goes even more.
I blame the Canadians, specially that @Turboman
- Posts
- 44,834
- Location
- East Dorset
I guess it depends on the type of Wifey you have, if you have one, and how far on you are with all the "little jobs" you have to do in the house!Don't say that. I'm pinning all my hopes on retirement.
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
Fortunately I have a wife that can’t stand the sight of me so on my days off there is a flask waiting for me to take over to the lockup for the day. Not for me you understand but cold water for the dog.
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Not my fault. It all got eaten by Beavers.I’m of the opinion that timber exporters are holding back supplies due to the expected price rises. The more they hold onto exports the harder it becomes to buy the stuff and up the price goes even more.
I blame the Canadians, specially that @Turboman
