Optimill Door hinges and heated mirrors - how?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
K

Karls

Active Member
Posts
508
Location
Gloucestershire
I bit the bullet and treated the ‘PIA’ to some Optimill door hinges; beautifully machined gems they are too!
Anyway, I decided to get the Mudstuff heated mirror elements and today I came to fitting one of the doors and to fit the heated mirrors, trouble is I’m expected to take a drill to the hinges and put a hole through them for the mirror wire. I can’t bring myself to do this on such lovely (and very expensive) hinges!

I have read but don’t understand where others have taken the wire through the door seal upstand on the body?

Are there any other options anyone knows of or can explain the door seal one?
Failing that, I’ll just have to go without heated mirrors
 
Karls said:
I bit the bullet and treated the ‘PIA’ to some Optimill door hinges; beautifully machined gems they are too!
Anyway, I decided to get the Mudstuff heated mirror elements and today I came to fitting one of the doors and to fit the heated mirrors, trouble is I’m expected to take a drill to the hinges and put a hole through them for the mirror wire. I can’t bring myself to do this on such lovely (and very expensive) hinges!

I have read but don’t understand where others have taken the wire through the door seal upstand on the body?

Are there any other options anyone knows of or can explain the door seal one?
Failing that, I’ll just have to go without heated mirrors
Click to expand...
Mudstuff don't drill a hole through the hinge, just the mirror arm and the Landy door. The cable tucks up the centre of the hinge. Looks like the Optimill ones have a big gap anorl, though I've never seen any first hand.
 
You’re right, I need to rephrase what I meant.
Mudstuff route the wire into a hole in the door between the two hinge bolt holes. The standard hinges are concave underneath which allow the wire to squeeze under the gap and then out through that hole. Optimill hinges are solid with no gaps underneath so there is no where for the wire to go.
 
DanClarke said:
https://www.ebay.co.uk/itm/Headligh...-To-Accept-Wires-Ford-Passenger-/111809306334
Maybe there is something ready-made out there?
Here's a 10mm hollow bolt as used on bicycle headsets.
https://www.ebay.co.uk/itm/Answer-Top-Cap-Star-Nut-1-1-8-10mm-Hollow-Bolt/191998153918?_trkparms=aid=555018&algo=PL.SIM&ao=2&asc=49131&meid=5097403c4a5e49dbb83da3f0d69c633b&pid=100005&rk=1&rkt=3&sd=202086728534&_trksid=p2047675.c100005.m2219
Click to expand...

Thanks for the suggestion. I’ll have to take another look at the hinge to mirror clearances when I’m next working on it to see if something is do-able.
 
 
I know Mick, I know. Don’t remind me! They do look and feel superb quality items though and I do like good quality stuff. That’s why I don’t want to put a mark on them.
 
mick the builder said:
Just looked them up, :eek::eek::eek::eek::eek: how much?
Click to expand...
Too much :p

Could you not run the wire inside the mirror arm then out underneath and through into the door? If you do it well you wouldn't see it unless you looked.
Personally I'd drill them.
Well personally I wouldn't buy heated mirrors we don't really get proper winters anymore not sure where you're from though maybe it's more justifiable
 
mick the builder said:
Id say they are more practical to most owners than say, snorkles, tree/rock sliders.;)
Click to expand...
Very true! :p wouldn't waste on them either though! Unless i was going rock sliding haha
Snorkels are most amusing they actually make it harder to see and unless you live in a desert or trawl rivers I can't see a point :D
Heated windscreens are awesome though
 
You must log in or register to reply here.

Similar threads

E
How to correct bent door pillars
Replies
8
Views
180
Scooby22
Scooby22
R
Mirrors
Replies
2
Views
292
roythebus
R
Kevlandau
Defender Door lock
Replies
19
Views
2K
Kevlandau
Kevlandau
PeterT135
Billet Aluminium Door Hinges
Replies
5
Views
796
v8250
v8250
K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
Back
Top