Freelander 1 OOoopps..

pardec · Jul 12, 2018

I was changing the PCV valve and managed to break one of the "t pieces" for the injector overflow return pipe

GrumpyGel · Jul 12, 2018

oopsey daze.

Hope the bit had a part number stamped on it

pardec · Jul 12, 2018

Got the part ordered, £28:00 for 12" of rubber pipe

Madmustang · Jul 12, 2018

Are you doing the brass conversion? I need to do that job do you just unscrew them and replace or is there a complicated process?

Arctic2 · Jul 13, 2018

Madmustang said:
Are you doing the brass conversion? I need to do that job do you just unscrew them and replace or is there a complicated process?

Straight forward job remove the spring clips, pair of pliers pull the leak back T joints out of the injectors with the hose still connected then make a copy of them from the new hose and brass joints.

https://www.ebay.co.uk/itm/281404361492

pardec · Jul 13, 2018

Madmustang said:
Are you doing the brass conversion? I need to do that job do you just unscrew them and replace or is there a complicated process?

I would have done, but i didn't know about them until your post

Freelander 1 OOoopps..

pardec

Active Member

GrumpyGel

Well-Known Member

pardec

Active Member

Madmustang

Well-Known Member

Arctic2

Well-Known Member

Attachments

pardec

Active Member

Similar threads