Oil on back of block

JtD88 · Jan 20, 2019

Hi, I’m new here so apologies if I’ve posted in the wrong place. I’ve recently had problems with oil down the back of the block, I changed the rocker gasket but it’s still occurring. My next thought was the head gasket but there are a couple plastic hoses with 180 degree bent ends floating around back there. Does anyone know what these are for ? It’s a 53 reg defender 90 td5. Pic attached, thanks in advance

Henry_b · Jan 20, 2019

It would help if we knew..

#1 what model and year the vehicle is

#2 what engine it has

#3 Petrol/diesel

etc etc

Oh and welcome

JtD88 · Jan 20, 2019

Henry_b said:
It would help if we knew..

#1 what model and year the vehicle is

#2 what engine it has

#3 Petrol/diesel

etc etc

Oh and welcome

Apologies il edit the post, it’s a 53 90 td5

Kev12 · Jan 20, 2019

Dont worry about them pipes, they are breathers

bluedog333 · Jan 20, 2019

I’m not that familiar with TD5 engines, but the two pipes are probably your axle breather pipes.
Dang! He beat me. ^^

JtD88 · Jan 20, 2019

Kev12 said:
Dont worry about them pipes, they are breathers

Perfect, one less thing to worry about shame this little oil leak is driving me nuts!

Henry_b · Jan 20, 2019

Probably HG if you replaced the Rocker cover gaskets correctly

bluedog333 · Jan 20, 2019

From that photo it looks like the rocker cover gasket is still leaking. Do you know what brand you used? You can get duff ones.

Si Click · Jan 20, 2019

The rear of the rocker gasket can also be difficult to get right. If you are not very careful the lip at the rear corner may not seat correctly.

JtD88 · Jan 20, 2019

bluedog333 said:
From that photo it looks like the rocker cover gasket is still leaking. Do you know what brand you used? You can get duff ones.

its a Bearmach one from eBay. unsure if its good or bad ?

JtD88 · Jan 20, 2019

Si Click said:
The rear of the rocker gasket can also be difficult to get right. If you are not very careful the lip at the rear corner may not seat correctly.

thanks for the info! I think il have it back off at some point just to double check, it seemed to line up pretty sweet though

Si Click · Jan 20, 2019

I've had no problem with Bearmach ones, but that is a small sample size. However, before you buy another one, take the rocker cover off and make sure it was seated correctly.

bluedog333 · Jan 20, 2019

JtD88 said:
its a Bearmach one from eBay. unsure if its good or bad ?

To be honest, each brand can supply good and duff. Bearmach are a supplier and not a manufacturer, they may have got a dodgy batch. There is a thread running about them being not that good, but again, each supplier can have good and bad moments.

bluedog333 · Jan 20, 2019

Looks like ‘Reinz’ is the genuine manufacturer, so if replacing you may want to spend the extra couple of quid and get one of theirs, or look for the ‘G’ suffix on part numbers.

JtD88 · Jan 20, 2019

bluedog333 said:
To be honest, each brand can supply good and duff. Bearmach are a supplier and not a manufacturer, they may have got a dodgy batch. There is a thread running about them being not that good, but again, each supplier can have good and bad moments.

awesome, I've checked eBay and they're literally a couple quid more :| ... I'm going to try changing that and seeing where i get to! il keep you posted

bluedog333 · Jan 20, 2019

I’ve had a quick search, because I’m bored, and the rubber half circle where yours is leaking is quite a common place to leak from and it’s recommended to apply a small amount of sealant to this area when fitting.

JtD88 · Jan 20, 2019

bluedog333 said:
I’ve had a quick search, because I’m bored, and the rubber half circle where yours is leaking is quite a common place to leak from and it’s recommended to apply a small amount of sealant to this area when fitting.

it amuses me that you've justified why you've had a look

... anyway, I've had a prod around and it doesn't seem too clever, i have some RTA silicone sealant I'm going to put some around that and leave it over night and hopefully all will be well

neilly · Jan 20, 2019

bluedog333 said:
I’ve had a quick search, because I’m bored, and the rubber half circle where yours is leaking is quite a common place to leak from and it’s recommended to apply a small amount of sealant to this area when fitting.

JtD88 said:
it amuses me that you've justified why you've had a look ... anyway, I've had a prod around and it doesn't seem too clever, i have some RTA silicone sealant I'm going to put some around that and leave it over night and hopefully all will be well

Have a read of the Workshop manual.

Cheers

JtD88 · Jan 20, 2019

neilly said:
Have a read of the Workshop manual.

View attachment 167854

Cheers

awesome, il give that a go and see where i get! the help is appreciated

neilly · Jan 20, 2019

JtD88 said:
awesome, il give that a go and see where i get! the help is appreciated

So yours on NOT an EU3 model then?

Cheers

Oil on back of block

Member

Attachments

Think outside, no box required.

Member

Well-Known Member

Well-Known Member

Member

Think outside, no box required.

Well-Known Member

Well-Known Member

Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Similar threads