We have a 1996 LandRover TDI.The vacuum bump on the block is leaking oil again.This will be the second time i have replaced it in 180000 Miles.The unit costs about $4oo Aus.Is there any way of repairing this unit,or do i trek off to bendix westinghouse and part with my hard earned dosh? Regards....AL
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Oil Leak with vaccuum pump
- Thread starter Allen R
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
JimAttrill
New Member
- Posts
- 429
- Location
- Johannesburg, South Africa
LR asked WABCO very nicely to make sure that the pump is not 'serviceable'.
With a bit of effort you can fit an alternator from a rice-burner which has a vacuum pump on the back, rather like the Denso TD5 alternator. If you investigate the local scrap yards you can also get an alternator with more power at the same time. You can take an oil feed to the pump from the turbo feed on the tdi.
With a bit of effort you can fit an alternator from a rice-burner which has a vacuum pump on the back, rather like the Denso TD5 alternator. If you investigate the local scrap yards you can also get an alternator with more power at the same time. You can take an oil feed to the pump from the turbo feed on the tdi.
JimAttrill
New Member
- Posts
- 429
- Location
- Johannesburg, South Africa
They either leak oil or don't work, or both at once. If it stops working you will need a very strong right leg to stop! This is because disk brakes have no self-servo effect like drums.
Talking of collusion, the ZF p/s pump fitted to the 300tdi is also not serviceable, yet all other ZF pumps of the same age are. I think there is some sort of deliberate action happening here. When I tackled ZF on this one they refused to comment.
Talking of collusion, the ZF p/s pump fitted to the 300tdi is also not serviceable, yet all other ZF pumps of the same age are. I think there is some sort of deliberate action happening here. When I tackled ZF on this one they refused to comment.
G'Day,I'm back.After a bit of a look around,i found a place that either reconditions vacuum pumps or gets someone to do them .I couldn"t get that out of them.However,as i said in a previous post, new $395au....Recon $225au.Bit of difference? If you are interested,their web site is Triumph Rover Spares or email at [email protected] Regards.................AL
JimAttrill
New Member
- Posts
- 429
- Location
- Johannesburg, South Africa
Well I wish them the best of luck with this one. I have taken one apart and there are lots of plastic bits in there. Make sure you get a good guarantee...
Well, the change over unit is on and running for about a week,and Lordy,Lordy....no oil leaks YET! As i have said previously, I cant find out what was replaced,the only visible sign of entry is the new grub screws that are tapped and placed around the casing.We can but hope,Regards.......AL
