holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
or if not we can celebrate with something much stronger like petrol and a big fire
oil leak from gearbox?
- Thread starter holidaychicken
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
or if not we can celebrate with something much stronger like petrol and a big fire
- Posts
- 16,479
Wait till Nov 5th and blame the local yoof'sor if not we can celebrate with something much stronger like petrol and a big fire
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
Well at last some better news, my local main dealer came out and reprogrammed it again with their laptop. Loony was there but the guy said the code was still there but he took it out and back again and it started fine. He tried disconnecting the battery and back on again and it started so maybe it was the length of time it was off, but anyway £90 lighter but that's a third of what it would cost me to try and get it trailered again.
Anyhoo, I only had 9.5 litres of ATF and it still wanted more but a quick drive around the block and loony tells me all was good so far. He also fixed a minor hose water leak.
Stand by for more detail when I'm back
I'll write up as best I can when we are all sorted...
Anyhoo, I only had 9.5 litres of ATF and it still wanted more but a quick drive around the block and loony tells me all was good so far. He also fixed a minor hose water leak.
Stand by for more detail when I'm back
I'll write up as best I can when we are all sorted...
myfirstl322
Well-Known Member
- Posts
- 41,354
- Location
- Hoots mon...
Did the brakes 'squeak'?
Bravo.... Guess you need to do a longer run to be sure but great stuff thus far.
Bravo.... Guess you need to do a longer run to be sure but great stuff thus far.
- Posts
- 16,479
Great job guys :5bparty::5bparty:
Now get the last 1.5 litres in, and give it a good run....over the moon for the pair of you and a massive pat on the back for you guys and of course RRPhil/Bemble too who is, lets face it, a fecking genius.
Now get the last 1.5 litres in, and give it a good run....over the moon for the pair of you and a massive pat on the back for you guys and of course RRPhil/Bemble too who is, lets face it, a fecking genius.
myfirstl322
Well-Known Member
- Posts
- 41,354
- Location
- Hoots mon...
Well done loony....
loony
Member
- Posts
- 53
Thanks Gents, I am really pleased there is no sign of oil leaks right now. Car has been up to running temps and sounds sweet. No selection trouble, everything is smooth.
I have to hold back a little though as until this car has done a 100 miles or more trouble free, I won't be completely satisfied.
Looking forward to getting it through all the gears on a decent run. Should be all ready for that Wednesday night.
I have to hold back a little though as until this car has done a 100 miles or more trouble free, I won't be completely satisfied.
Looking forward to getting it through all the gears on a decent run. Should be all ready for that Wednesday night.
myfirstl322
Well-Known Member
- Posts
- 41,354
- Location
- Hoots mon...
Would you do another?
- Posts
- 16,479
And another
loony
Member
- Posts
- 53
mmm, well I will support andy if we get more trouble, whatever it takes. I wouldn't want to do one on a drive outdoors again to be honest.
It would have to be indoors and at a comfortable working height with plenty of clean space and no time limits. I have been a mechanic all my life and I don't enjoy roughing it anymore and the stress of having to get things done by a deadline, just cant do it mentally.
It would have to be indoors and at a comfortable working height with plenty of clean space and no time limits. I have been a mechanic all my life and I don't enjoy roughing it anymore and the stress of having to get things done by a deadline, just cant do it mentally.
myfirstl322
Well-Known Member
- Posts
- 41,354
- Location
- Hoots mon...
Fair enough, just a general ask thats all.
loony
Member
- Posts
- 53
From a technical point of view it isn't actually that hard a job. Obviously Phil did the complex work on the valve block, but I reckon anyone with a half decent tool kit and regular old common sense could do it in a reasonable amount of time.
I wouldn't even have attempted this in the first place without a manual so that has made a huge difference. The amount of work we have completed has cost a lot of money though, I don't think that could be reduced much at all. But like we have been saying "what cost is enjoyment from something".
Something else is I wouldn't trust anyone else that I didn't know to go to the lengths we have to try and get it right. The labour costs would be seriously expensive. Much better doing it yourself.
After taking it for a quick spin, I can see why people enjoy these cars so its well worth the effort to keep it running nice.
I wouldn't even have attempted this in the first place without a manual so that has made a huge difference. The amount of work we have completed has cost a lot of money though, I don't think that could be reduced much at all. But like we have been saying "what cost is enjoyment from something".
Something else is I wouldn't trust anyone else that I didn't know to go to the lengths we have to try and get it right. The labour costs would be seriously expensive. Much better doing it yourself.
After taking it for a quick spin, I can see why people enjoy these cars so its well worth the effort to keep it running nice.
myfirstl322
Well-Known Member
- Posts
- 41,354
- Location
- Hoots mon...
I'm missing mine something hellish,,, only thing that underwhelmed me was **** trim, tad firm ride and lack of variable RATIO steering,
myfirstl322
Well-Known Member
- Posts
- 41,354
- Location
- Hoots mon...
And i would have done box myself if it went, albeit by following a manual and sending cake and beer to bemble the great...
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
If it was down to me doing it on my own I wouldn't have had a chance
I think I was extremely fortunate having the combination of loony and Phil doing most of the spannering and technical support. I'm not even sure Phil is real, its like whatever you ask him, he has the answer along with a photo and manual extract, we could be tapping into some higher power !
I am glad we didn't have to touch the valve block as there is probably more parts in that than the rest of the box, fortunately Phil did all that for nothing, there is no way we would have considered starting the project without his advice
I think if we needed to get it done to a deadline it would have been unbearable
Like loony says we need a few more miles under our belt first and there is no way a normal AT Specialist would have replaced all the extra little faults we found that all took time, even if it was just waiting for parts.
I'll admit a few times I doubted what we were doing even at the start with the ramps but I have total trust in loony, I can't imagine doing what we did with four axle stands on a block pathing drive, feck that ..
I don't think anything was really difficult but knowledge is power, but then I generally made the coffee when the swearing from under the wagon got too much..
I think I was extremely fortunate having the combination of loony and Phil doing most of the spannering and technical support. I'm not even sure Phil is real, its like whatever you ask him, he has the answer along with a photo and manual extract, we could be tapping into some higher power !
I am glad we didn't have to touch the valve block as there is probably more parts in that than the rest of the box, fortunately Phil did all that for nothing, there is no way we would have considered starting the project without his advice
I think if we needed to get it done to a deadline it would have been unbearable
Like loony says we need a few more miles under our belt first and there is no way a normal AT Specialist would have replaced all the extra little faults we found that all took time, even if it was just waiting for parts.
I'll admit a few times I doubted what we were doing even at the start with the ramps but I have total trust in loony, I can't imagine doing what we did with four axle stands on a block pathing drive, feck that ..
I don't think anything was really difficult but knowledge is power, but then I generally made the coffee when the swearing from under the wagon got too much..
Last edited:
loony
Member
- Posts
- 53
Another question is does any one have a wiring diagram with wire colours for the engine bay loom M62 4.4V8?
And a Fusebox layout with fuse descriptions and positions?
And yet more, when searching around top of engine I found that there seems to be a small fuel leak on the right hand bank rear cylinders, is there a weak point to investigate?
looks like fuel rail to injectors weeping.
And a Fusebox layout with fuse descriptions and positions?
And yet more, when searching around top of engine I found that there seems to be a small fuel leak on the right hand bank rear cylinders, is there a weak point to investigate?
looks like fuel rail to injectors weeping.
Last edited:
myfirstl322
Well-Known Member
- Posts
- 41,354
- Location
- Hoots mon...
As for injectors, seems like one of the o-rings is culprit, i would just de-pressurise rail at shraeder valve, undo rail mountings partialy and give it a wiggle up and down, you never know,it might reseal, although for proper peace of mind its rail off and fit new o-rings x8.
