stag888
Active Member
- Posts
- 113
- Location
- Bromley , Kent
Hi ,
Finished adjusting the door hinges this weekend , and went out for a long hard drive , including some steep / steep hills - got home to discover that the engine had blown oil ( maybe 1/2 pint , looks worse than it actually is ) out through the oil breather stack
.
Cleaned up now , but believe it must have been some sort of pressure relief issue . Am looking for a bit of guidance , A while back , when I got the vehicle I posted about the fact it had no oil bath , and concern over the pipework - I think this has something to do with it , it has just a direct connection from the breather on the top of the rocker cover to the base of the carb , see bottom right , with no T into the Oil bath hose like the standard set up . My initial thoughts are to T into the direct connection and add a motorbike style breather filter , hopefully this will allow more relief , - Thoughts ?
Cheers Steve
Finished adjusting the door hinges this weekend , and went out for a long hard drive , including some steep / steep hills - got home to discover that the engine had blown oil ( maybe 1/2 pint , looks worse than it actually is ) out through the oil breather stack
.
Cleaned up now , but believe it must have been some sort of pressure relief issue . Am looking for a bit of guidance , A while back , when I got the vehicle I posted about the fact it had no oil bath , and concern over the pipework - I think this has something to do with it , it has just a direct connection from the breather on the top of the rocker cover to the base of the carb , see bottom right , with no T into the Oil bath hose like the standard set up . My initial thoughts are to T into the direct connection and add a motorbike style breather filter , hopefully this will allow more relief , - Thoughts ?
Cheers Steve