Odd Sound

I have 2007 Range Rover hse with 4.4 jag motor. At low speeds and with slight throttle I hear a grinding noise from what sounds like left side of engine bay or behind steering wheel. It is not a metal grinding but an odd churning sound. I have a clip that you can hear it. Specifically around 36 second mark it is clear.

NC-Rover said:

I have 2007 Range Rover hse with 4.4 jag motor. At low speeds and with slight throttle I hear a grinding noise from what sounds like left side of engine bay or behind steering wheel. It is not a metal grinding but an odd churning sound. I have a clip that you can hear it. Specifically around 36 second mark it is clear.

Click to expand...

AA are OK. It's united you want to avoid!

Wazzajnr said:

AA are OK. It's united you want to avoid!

Click to expand...

AA are not very good but slightly better than RAC.

I'd love to be hauled of a United flight with a bloody nose and a mahoosive wedgy if there was 100k in it for me.

myfirstl322 said:

I'd love to be hauled of a United flight with a bloody nose and a mahoosive wedgy if there was 100k in it for me.

Click to expand...

Exactly my thought

Still having same noise as long ago. Any thoughts? The noise is not steering related as mentioned in a post up top. I posted new link to the sound to see if it would help isolate the issue. I have a 2007 Range Rover HSE 4.4 Jag Motor with 127,000 miles on the odo and located in Greensboro NC. For the past few months I have had a odd gurgle sound around 1200 to 1700 RPM. I have attached a clip of the dash to see RPM and sound along with speed etc. The sound starts around the 28 second mark and continues anytime i get near that RPM

I have replaced the Wheel Bearings, CV Axels, Wheel Hubs previously but this only makes the sound when I press the accelerator. When the window is down it actual makes a slight metallic sound at that same RPM. when the windows are up the sound is what you hear in the video.

Thoughts suggestions of things to check etc would be greatly appreciated. I work on my own vehicle so easy for me to try out various recommendations for the most part.

Thank you all for the help in advance!



Scott