OBD II PIN OUT Detail

KingMustafa · Nov 15, 2017

Dears Good day,

Please i need pin out detail for the obd2 for P38

Thank you for you kind support

Wazzajnr · Nov 15, 2017

A 3 second search on here or Google will show it to you.
It's probably also in RAVE which for which there is a download link in the technical archive.

KingMustafa · Nov 15, 2017

Wazzajnr said:
A 3 second search on here or Google will show it to you.
It's probably also in RAVE which for which there is a download link in the technical archive.

I tried to find out pic but could not. I need that becz i can not read the ECU by the scan tool. i reach all other ECUs & becm. but the Engine ecu can not> plz help?

Wazzajnr · Nov 15, 2017

KingMustafa said:
I tried to find out pic but could not. I need that becz i can not read the ECU by the scan tool. i reach all other ECUs & becm. but the Engine ecu can not> plz help?

https://www.landyzone.co.uk/land-rover/obd-ii-data-port.183749/

KingMustafa · Nov 15, 2017

Wazzajnr said:
https://www.landyzone.co.uk/land-rover/obd-ii-data-port.183749/

Dear, Highly appreciated your support, Could you tell me which wire from OBD goes to the Engine ecu or use to diagnostic the ecu for engine?

brianp38dse · Nov 15, 2017

Have you checked and cleaned the pins in connector with electrical contact cleaner, and what diag are you using.

Wazzajnr · Nov 15, 2017

The engine ecu will be standard obd2 compliant wiring

brianp38dse · Nov 15, 2017

Wazzajnr said:
The engine ecu will be standard obd2 compliant wiring

Well at least that one good point on an L322

KingMustafa · Nov 15, 2017

brianp38dse said:
Have you checked and cleaned the pins in connector with electrical contact cleaner, and what diag are you using.

I am using Lynx tool. I work wth this tool with no issues but in this car is really strange ( gems petrol)

myfirstl322 · Nov 15, 2017

brianp38dse said:
Well at least that one good point on an L322

It's not an L322

brianp38dse · Nov 15, 2017

myfirstl322 said:
It's not an L322

Just worked that one out, its all these post about the L322 atm that's getting me confused, mind that is very easily done I blame it on RR ownership it will drive us all to the nut house

Wazzajnr · Nov 15, 2017

Sorry, my mistake, I thought it would be compliant by then but the requirement only came in from 2000.
Tgat said, I'm fairly sure it will use the same wiring. There are a number of people on rr.net that have had some limited success with elm327 scanners which suggests that the wiring is standard obd2 wiring

Saint.V8 · Nov 15, 2017

If it is a Diesel - you won't get anything through OBD Protocol, it needs dedicated diagnostics for the P38.

myfirstl322 · Nov 15, 2017

KingMustafa said:
( gems petrol)

Look like it's a gems petrol Saint.

Saint.V8 · Nov 15, 2017

myfirstl322 said:
Look like it's a gems petrol Saint.

Good spot, missed that tiny parenthesis' remark in one of the posts!!

This is why we ask for vehicle details to be in the first post - helps others to provide the most relevant information....

OBD II PIN OUT Detail

KingMustafa

Member

Wazzajnr

Well-Known Member

KingMustafa

Member

Wazzajnr

Well-Known Member

KingMustafa

Member

brianp38dse

Well-Known Member

Wazzajnr

Well-Known Member

brianp38dse

Well-Known Member

KingMustafa

Member

myfirstl322

Well-Known Member

brianp38dse

Well-Known Member

Wazzajnr

Well-Known Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

myfirstl322

Well-Known Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Similar threads