Nuther new noise

Bobsticle · Jan 26, 2023

tottot said:
Problem if you put shims between axle and springs. There are pins in the springs that locate in the axle plate to prevent any side to side back and fore movement, a 10mm spacer would leave little to locate and lower your ride height.
Seller is correct, different one by diff bulge. Answer is to get the correct U's for parabolic diabolocks.

Too late.
I may weld the axles on.

tottot · Jan 27, 2023

Bobsticle said:
Too late.
I may weld the axles on.

I would do baler twine and plastic ties.

Turboman · Jan 27, 2023

tottot said:
I would do baler twine and plastic ties.

Or upgrade to a bit of blue BT drawrope.

Colthebrummie · Jan 27, 2023

I think If I removed all the nuts and bolts from my landy, the rust would still hold it together quite well.

Col

Bobsticle · Jan 27, 2023

Colthebrummie said:
I think If I removed all the nuts and bolts from my landy, the rust would still hold it together quite well.

Col

I derusted mine by changing a wheel. By the time I’d beaten the wheel nuts off all the rust was on the drive.

LordOWar · Jan 28, 2023

Jones springs do them but they are £40 an axle.

Bobsticle · Jan 28, 2023

LordOWar said:
Jones springs do them but they are £40 an axle.

Jones springs can kiss mi differential.

Bobsticle · Feb 21, 2023

It’s a con I tell ya.
After weeks of nailing stuff back on followed by a trip round the block the new noise continued unabated.

I finally got round to gearbox oils and only managed to squeeze in barely two pints. The bleedin noise stopped all on its own.

Nuther new noise

Bobsticle

De Villes Advocaat

tottot

Well-Known Member

Turboman

Mab An Gov

Colthebrummie

Well-Known Member

Bobsticle

De Villes Advocaat

LordOWar

Well-Known Member

Bobsticle

De Villes Advocaat

Bobsticle

De Villes Advocaat

Similar threads