Not so clean

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

sebcom

New Member
Posts
5
Location
Alabama
Hi,
What do you think of this engine? Looks not so clean to me. Should I worried or do something before to put everything back together?
Thanks!

TBTfN9f

0VN59d3

k4NgTGh

t4XdqNL

https://ibb.co/TBTfN9f
https://ibb.co/0VN59d3
https://ibb.co/k4NgTGh
https://ibb.co/t4XdqNL
 
Thumbnails make it easier, hope it helps
 

Attachments

  • IMG-20190815-171906.jpg
    IMG-20190815-171906.jpg
    78.3 KB · Views: 352
  • IMG-20190815-171923.jpg
    IMG-20190815-171923.jpg
    54 KB · Views: 322
  • IMG-20190815-171929.jpg
    IMG-20190815-171929.jpg
    194.8 KB · Views: 318
  • IMG-20190815-171933.jpg
    IMG-20190815-171933.jpg
    206.8 KB · Views: 333
I don't know the history, but I'd soak up any water with a cloth, remove any surface rust in the bores with some very fine emery, turn the engine over to check where you can't see them out it all back together.
Check the cams while you're at it and make sure all the lobes are nice and tall
 
While you've got the heads off strip & clean the rockers & their shafts ensuring the oilways are clear.
As you clean each item slide it onto a length of dowel to be sure they go back into their original positions when refitting. Keep an eye out for any shims under the pedestals when you undo the bolts.
 
While you've got the heads off strip & clean the rockers & their shafts ensuring the oilways are clear.
As you clean each item slide it onto a length of dowel to be sure they go back into their original positions when refitting. Keep an eye out for any shims under the pedestals when you undo the bolts.
Done.
Almost finished to put everything back together.
 
Back
Top