Disco 3 (LR3) Not Many D3 Owners Here?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

ClassikFan

Active Member
Posts
328
Location
Surrey
Been a member here for well over 3 years now, Forum has been a great source of info and has helped massively with maintaining my TD5.
Now have a D3 and feel Landyzone is not a regular haunt of D3 & D4 owners. Not sure why, is it a historical thing?
 
There are a few of us here. As above, as they come down in value there will be more....

seems with the launch of the d5 it has finally bought them in reach now

don't know how well they hold there value,

think the d3 has some big boots following on from the d1-d2
 
The D3/D4 models weren't a natural progression from D1/D2, and with the problems the D3 had, it put folks off the model.

I'm happy to stay with the D2 V8 for now, spares are cheap and it is maintainable at home.

Peter
 
Try and make this noise with your tongue and lips

thrrrrrrrruuuuuuuuuuuuuuuuuuuuuuuu ;)

or better still

IMG_0401.GIF
IMG_0401.GIF
IMG_0401.GIF
IMG_0401.GIF
 
The D3/D4 models weren't a natural progression from D1/D2, and with the problems the D3 had, it put folks off the model.

I'm happy to stay with the D2 V8 for now, spares are cheap and it is maintainable at home.

Peter

done a lot of research before buying the d3, it was the chassis rusting that put me off the earlier d2 models, did see some d2s, but as soon as i looked at the back chassis section could see the rust

but know in a lot of cases if there looked after its not a problem, but at that level some were asking nearly the same as a base modelled D3

alas i did buy mine with faults, but felt that way i could get a disco and then over time fix and resolve the issues , leaving me at the end of the day with a decent landy that should last me a good number of years

intend to clean and use some dinotrol for the chassis in the summer , so at least with the temperatures being better for the paint to go off

on reading it seems some use a power washer to blast any junk out of the inside of the chassis first, use a rust converter first, then use different paint system to put a good primer down followed by a top coat and also to inject a paint system inside the chassis , as i understand it's suppose to rust from the inside out
 
Back
Top