North Yorkshire Lanes
- Thread starter BIGC2011
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 14,902
- Location
- Doncaster
Might be worth checking the A-frame bushes at the chassis and the joint at the axle end. When they're worn they can cause a wobble/vibration and sometimes also cause a clunk on set-off and when slowing down or letting off power. A small amount of movement can make a huge difference to the feel of the vehicle.
- Posts
- 14,902
- Location
- Doncaster
Yep.
I found that a sharp clunk or thud was usually the chassis bushes, but the axle wobbling or causing vibration was mostly the joint, but it could be anything like that, even the trailing arm bushes.
Indeed, even though it 'feels' to you that it might be from the rear it could be almost any worn or split bushes, radius arms, damper mounts etc.
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
timandmick
Active Member
- Posts
- 996
- Location
- west yorkshire
i'm selling them off now £30 each need some room to make some thing else lol going fast...
when they get down to a tenner then i will be interested lol
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
timandmick
Active Member
- Posts
- 996
- Location
- west yorkshire
if there a tenner then you've been making then....
do they also come with a year's supply of wood lol
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
i'm selling them off now £30 each need some room to make some thing else lol going fast...
pmsl :hysterically_laughi
which one works best?
:tea:
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
15KG bottle 6inchx 2ft flue 5mm thick burn's like a good un..
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
yes it looks like a face...
i've had it all night...
i've had it all night...
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
hope your not taking the micky out of my metel working skill's...
not at all
considered meself making a horizontal burner, just never got on with it.
with so many different "designs", was a serious question as to which performed the best
when's mk2 coming out? burners with afterburners?
or forced air burners
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
not at all
considered meself making a horizontal burner, just never got on with it.
with so many different "designs", was a serious question as to which performed the best
when's mk2 coming out? burners with afterburners?
or forced air burners
was thinking about doing one with a small 12volt fan attached ,,want to make one glow red..
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
not at all
considered meself making a horizontal burner, just never got on with it.
with so many different "designs", was a serious question as to which performed the best
when's mk2 coming out? burners with afterburners?
or forced air burners
stand up ones seem to give out more heat but the other ones burn for longer think there be better with coal
- Posts
- 14,902
- Location
- Doncaster
Small fan .. feckin' SMALL !!!
Have dreams man, have dreams and aspirations and go 'kin mahoosive with the fan ... PROPER forced air induction ... and an afterburner up the chimney ...
Then Video it so we can see it melt ..
Similar threads
