FE35
Member
- Posts
- 13
- Location
- Lancashire
My overdrive on my 88 2a makes quite a din when engaged; is it usually one thing that could cause it or is it not that easy to diagnose?
Thanks
Thanks
Noisy Fairey Overdrive
- Thread starter FE35
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
rob1miles
Well-Known Member
- Posts
- 3,565
- Location
- Slough and Bath
First suspect is the needle bearing on the input drive "clutch".
scottonthefen
Well-Known Member
- Posts
- 532
- Location
- England
As rob says. You could pop it off the transfer box easily enough and have a look in with a torch. Here's a video that shows what you're looking for on the clutch sleeve..
Note that bit will be in the transfer box behind the mainshaft nut, it won't come off with your overdrive.
Note that bit will be in the transfer box behind the mainshaft nut, it won't come off with your overdrive.
rob1miles
Well-Known Member
- Posts
- 3,565
- Location
- Slough and Bath
When the OD is out both inner and outer spin at the same speed as the unit is locked.
Similar threads
