No brake lights. Think I've found problem but need help please!

Hello. Just got my ninety back from having some work done and got told I have no brake lights. I found what I believe to be the brake light switch with 2 disconnected wires coming from it. I've attached some photos and wondered if anyone could confirm it is the switch and whether the two wires I've located coming out of the bulkhead in the other photos should be connected to the switch.? Thanks in advance for any help you can give me.

Matt

Here's the photo of the two wires with no home...

thats the brake light switch wires for it are green and green with black stripe iirc,there is only 1 pic but wires shouldnt be far away coming out of bulkhead loom gromit

NINETYMATT said:

Here's the photo of the two wires with no home...

Click to expand...

looks like them, may well be a reason or fault in why they are disconnected

Thank you very much. Reason I think is that the landy is just back from having a bulkhead repair and I think these got missed in the rebuild. Thanks very much for the reply I'll go and connect them up.

NINETYMATT said:

Thank you very much. Reason I think is that the landy is just back from having a bulkhead repair and I think these got missed in the rebuild. Thanks very much for the reply I'll go and connect them up.

Click to expand...

check to make sure they didn't get melted during the welding repairs.

All fixed. Thanks very much

NINETYMATT said:

All fixed. Thanks very much

Click to expand...

that was a quick fix both in solution and time ,40 mins