newby

West Slope Rover · Nov 14, 2012

mjundt said:
Oh Im good to go, we saved there ass the first time i figured they help a bloke.HAHA

Moxie, I tell ya!

blue beasty · Nov 14, 2012

mjundt said:
Oh Im good to go, we saved there ass the first time i figured they help a bloke.HAHA

Credit were credits due....

Better late than never

Alpha Wolf · Nov 14, 2012

mjundt said:
Oh Im good to go, we saved there ass the first time i figured they help a bloke.HAHA

Would that be back in 1775 then.....?

no offense mate welcome and yes change your oil..

kato Disco · Nov 14, 2012

At least you seen sense to buy blittish! Lol.

mjundt · Nov 17, 2012

That would be 45,and none taken. Just looking for some advice been im new to land rover.

mjundt · Nov 27, 2012

Hey, my 98 disco makes a whistle noise on the top end around the throttle body when it gets warmed up. Any ideas what it could be?

Bromsgrove Defender · Nov 30, 2012

mjundt said:
Hey, my 98 disco makes a whistle noise on the top end around the throttle body when it gets warmed up. Any ideas what it could be?

At a rough guess a leak

strange_days · Nov 30, 2012

mjundt said:
Oh Im good to go, we saved there ass the first time i figured they help a bloke.HAHA

mjundt said:
That would be 45,and none taken. Just looking for some advice been im new to land rover.

Advice

1 - Learn to spell

2 - Get your history right

3 - Use the search button

4 - Don't mention the war!

5 - 45 wasn't the first time, and given that you kept yourselves out of it as long as possible until the Japs beat yo ass, best to keep quiet about this sort of thing..

Welcome btw

mjundt · Dec 18, 2012

Ok. I realy need some help. I have a 1998 disco 1. I had to change the water pump and all lines with it. Removed the intake plenum and seled it along with some vac leaks. I replaced the thermostat also. When I started it after all that it ran great but a high idle at around 1700 rpm and started to overheat. Then after stoping to let cool off restarted it and now it runs at 3000 rpm and wont idle down. What could be the problem?

Bromsgrove Defender · Dec 19, 2012

mjundt said:
Ok. I realy need some help. I have a 1998 disco 1. I had to change the water pump and all lines with it. Removed the intake plenum and seled it along with some vac leaks. I replaced the thermostat also. When I started it after all that it ran great but a high idle at around 1700 rpm and started to overheat. Then after stoping to let cool off restarted it and now it runs at 3000 rpm and wont idle down. What could be the problem?

Are you sure you refilled it properly and got all the air out??

When you sealed it, are ya absolutely sure what ever you used had cured before start up? Cos I'm thinkiing it's sucked something into somewhere it shouldn't have

Soloby Rob · Dec 19, 2012

mjundt said:
Ok. I realy need some help. I have a 1998 disco 1. I had to change the water pump and all lines with it. Removed the intake plenum and seled it along with some vac leaks. I replaced the thermostat also. When I started it after all that it ran great but a high idle at around 1700 rpm and started to overheat. Then after stoping to let cool off restarted it and now it runs at 3000 rpm and wont idle down. What could be the problem?

You'll get more help if you post this in the Disco section mate.

newby

West Slope Rover

Well-Known Member

blue beasty

Leaks an prone to bits dropping off

Alpha Wolf

New Member

kato Disco

Well-Known Member

mjundt

New Member

mjundt

New Member

Bromsgrove Defender

Well-Known Member

strange_days

New Member

mjundt

New Member

Bromsgrove Defender

Well-Known Member

Soloby Rob

Banned

Similar threads