Newbie D2 air suspension woes

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Posts
10
Location
Staffordshire
Hi... my trusty D2 is poorly and making me pull my hair out!
Rear air suspension pumps up OSR to full height, and almost nothing in the OSR - making it a dangerous ride! Ive swapped over the electrical connecters from height sensors to the valve block, which makes the fault swap sides!
New airbags, new ride height sensors...
Any ideas where to go next? Ive taken the plunge and got a Nanocom on the way, but anything i can test, before it arrives?
Cheers everyone :)
 
IMG_20210519_225233~2.jpg
 
So Ive managed to source a 'new' known working compressor and valve block. But no change. Still High on one side and almost no air on the other.
Waiting till the Nanocom arrives on Tuesday.... that should be able to help me out a bit...
 
Hi.
Thought I'd update an end to this, as its frustrating sometimes to read a thread and then not know how an issue was fixed...
Turns out then, that the suspension needed re adjusting at the back, following the level sensor failure - nothing an hour with the Nanocom couldn't sort out :)

So, anyone around NW UK that needs a nano com... there's one here now :)

Right. Now time to attack the rear chassis.!
 
Back
Top