cosmicjohn
Member
- Posts
- 33
- Location
- clydebank
new toy
- Thread starter cosmicjohn
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
biggeeeee
Retired - Living the dream
- Posts
- 11,090
- Location
- Lanarkshire or Argyll
cool when you free
PM sent
cosmicjohn
Member
- Posts
- 33
- Location
- clydebank
pm sent back
cosmicjohn
Member
- Posts
- 33
- Location
- clydebank
cosmicjohn
Member
- Posts
- 33
- Location
- clydebank
aframe is pitted but not holedThis picture caught my eye, check the tubular cross member for the "A" frame.
The flat plates look quite corroded, best give the slap with a hammer test before you weld the floor in, you'll never do it from underneath once it is in!!!
Best of luck saving it matey, buy replacement panels for it and spend, spend, spend, it will be well worth it in the long run, time saved and less stress trying to blow holes, I mean weld in patches, Just cut the rot out, drill an spot it in place
PS.
If the cross member side plates have rotted through look HERE to see y build thread where I tackled exactly the same.
thanks mate for your eyes and help
Neildisco300
Active Member
- Posts
- 189
- Location
- Renfrewshire
John it's the angled mount at the end of the round cross member that looks rotten just where it joins the top of the chassis, it's a very common rot point on the chassis.
Btw forget that first pm, I know know what your problems are lol
Btw forget that first pm, I know know what your problems are lol
cosmicjohn
Member
- Posts
- 33
- Location
- clydebank
Getting there
Neildisco300
Active Member
- Posts
- 189
- Location
- Renfrewshire
What time will you be over at your unit from tomorrow? I'll swing by mine grab those parts and head over to yours.
cosmicjohn
Member
- Posts
- 33
- Location
- clydebank
Will give u a text matey when am over there 😊
cosmicjohn
Member
- Posts
- 33
- Location
- clydebank
its near finished last push and shes done more photos will follow
cosmicjohn
Member
- Posts
- 33
- Location
- clydebank
cosmicjohn
Member
- Posts
- 33
- Location
- clydebank
cosmicjohn
Member
- Posts
- 33
- Location
- clydebank
next weeks jobs
time to cut windscreen out as some **** had a go in past an made a total cock of it
put rear seats in
seatbels
fix the paint work
valet
seat covers
cb/ham radio
snorkel
light bar with leds
oh an wait for dvla to send me the docs 6 bloody weeks
time to cut windscreen out as some **** had a go in past an made a total cock of it
put rear seats in
seatbels
fix the paint work
valet
seat covers
cb/ham radio
snorkel
light bar with leds
oh an wait for dvla to send me the docs 6 bloody weeks
