NEW TO THE SCENE QUESTIONS - 1991 defender county

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

weverall91county

New Member
Posts
7
hey, just getting a 1991 defender county, and was wondering what people know about putting a snorkel on, as from what i can gather there doesn't seem to be a vent thing where i can put one. would i have to cut it out at all?
and anyone know anything about 1991 Tdi models i should look for?
 
okay
probably a 200tdi - good strong engine and reliable . (but not as good as a 300tdi !!) he he
lt77 gearbox again strong and reliable . ( almost as good as a r380 )
probably been abused so service these well aswell as diffs and tranny box

check fer rust in the bulkhead rear x memeber and under the wheel spats . ]

take a screw driver and hammer to it and see if you can make any holes in the chassis . try hard.





any pics

oh an duno bout snorkel is there no vent on passenger side fron wing
 
cheers, yeh ill get the pictures up like in nxt 5 minutes. its a friends and hasnt really been abused at all.

"check fer rust in the bulkhead rear x memeber and under the wheel spats"
im sorry but that meant nothing to me =]

but yeh lookin at pictures of that model will have to cut out section, unless i post somwehere else and see if anytones done it
 
hope this works

938629891a8150913746l.jpg


938629891a8150914088l.jpg


938629891a8150914281l.jpg

938629891a8150913547l.jpg
 
but yeh lookin at pictures of that model will have to cut out section, unless i post somwehere else and see if anytones done it

you wont have to do any cutting, there's a big black air intake on the vertical face of the left hand wing just forward of the bulkhead
 
cheers, yeh ill get the pictures up like in nxt 5 minutes. its a friends and hasnt really been abused at all.

"check fer rust in the bulkhead rear x memeber and under the wheel spats"
im sorry but that meant nothing to me =]

but yeh lookin at pictures of that model will have to cut out section, unless i post somwehere else and see if anytones done it

200tdi snorkel goes on the Passenger side wing like this. there is already a vent in place. you just unscrew it and fit the snorkel to the hole.

Gatesgarth.jpg
 
cheers, yeh ill get the pictures up like in nxt 5 minutes. its a friends and hasnt really been abused at all.

"check fer rust in the bulkhead rear x memeber and under the wheel spats"
im sorry but that meant nothing to me =]

but yeh lookin at pictures of that model will have to cut out section, unless i post somwehere else and see if anytones done it

The bulkhead is the front panel under the windscreen that houses the airvent flaps and the door hinges bolt to. They rust round the screen hinges and at the bottoms where they meet the sills.

Rear X member is rear crossmember the chassis rail at the back of the landy the the body bolts to, and towbar hitch. these rot as well usually on the ends and where the chassis legs are welded to the crossmember.

Not sure what he meant about under the wheelspats as too me a wheel spat is the wheel arch extension and under that's aluminium.
 
cheers lads, will have to get my mate who owes me a few favours to have a go at it, mechanic by trade so handy enough. yeh its really nice not much done like the tyre on the front, may put another, mainly for looks, dont judge me on that, when i get a job and can afford things, the offroading adventres will begin!! just finished first year agriculture at college,
 
cheers lads, will have to get my mate who owes me a few favours to have a go at it, mechanic by trade so handy enough. yeh its really nice not much done like the tyre on the front, may put another, mainly for looks, dont judge me on that, when i get a job and can afford things, the offroading adventres will begin!! just finished first year agriculture at college,

Good shout chap, what college?
 
Back
Top