brianp38dse
Well-Known Member
- Posts
- 20,062
- Location
- heathrow
You had the better part of the deal there, i helped my mate with his tdv8 sports arb bushes and they are a pig to do due to access there was no room to get on the bolts
Sport New to me 4.2 sc
- Thread starter biketeacherdave
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
biketeacherdave
Well-Known Member
- Posts
- 4,884
- Location
- south east london
Yep the ace does make it a bit tight but my mate just dissconnected the drive shaft to get better access, took him an hour or so. Took me a week of spare time to sort his cars paint work
- Posts
- 12,628
- Location
- Sud ouest France !
brianp38dse
Well-Known Member
- Posts
- 20,062
- Location
- heathrow
Never thought to disconnect the drive shaft
Tricky of York
Well-Known Member
- Posts
- 622
- Location
- York
Nice job, I still believe there is a place for quality colour coded trim. My sons car gets regular thumbs up for matching in all the sad moulded black plastic. We’ll done.
Tricky
Tricky
biketeacherdave
Well-Known Member
- Posts
- 4,884
- Location
- south east london
Fitted the grill, it's growing on me so I will spray the rear door lower trim as well.
biketeacherdave
Well-Known Member
- Posts
- 4,884
- Location
- south east london
Made it dirty
- Posts
- 4,653
- Location
- Rotherham
Down and dirty or just dirty
biketeacherdave
Well-Known Member
- Posts
- 4,884
- Location
- south east london
biketeacherdave
Well-Known Member
- Posts
- 4,884
- Location
- south east london
Continuing with the colour coding I got hold of a rear lower tailgate trim panel. It came in silver/grey I debadged it rubbed it down coat of primer,coat of base, couple of coats of clear bit of a hand sand 
with 2000 grit then a polish
with 2000 grit then a polish
biketeacherdave
Well-Known Member
- Posts
- 4,884
- Location
- south east london
New door handle covers they came in gloss black. Little rub down, undercoated, base coat then clear coat.
Tricky of York
Well-Known Member
- Posts
- 622
- Location
- York
Doing oily bits is very rewarding and often necessary but every once in a while it’s great to add something that the original designer would have done especially where it takes some years off the appearance of an awesome ride. Again, we’ll done Dave.
Tricky
biketeacherdave
Well-Known Member
- Posts
- 4,884
- Location
- south east london
It's been a labour of love all the mechanics are done it runs well the suspension and steering are now all good I even sorted the lpg. I promised my self to sort out the paint last I'm preparing my self for a roof respray it's been 30 years since I sprayed cars so practising on the smaller bits is good to relearn
biketeacherdave
Well-Known Member
- Posts
- 4,884
- Location
- south east london
New side vents arrived so gave them the colour coding treatment.
Finally my extra rattle cans arrived in preparation for repainting the scabby roof. Mean while iv turned my attention to a few scabby bits of body work starting with my os rear door. I had previously wet sanded and sprayed a bit of base coat for winter protection.
Here's what I started with I gave it a gentle wet sand.
Lite dusting of base coate
Clear coat done it needs a couple of days before I wet sand n hit it with the polisher.
Finally my extra rattle cans arrived in preparation for repainting the scabby roof. Mean while iv turned my attention to a few scabby bits of body work starting with my os rear door. I had previously wet sanded and sprayed a bit of base coat for winter protection.
Here's what I started with I gave it a gentle wet sand.
Lite dusting of base coate
Clear coat done it needs a couple of days before I wet sand n hit it with the polisher.
Attachments
biketeacherdave
Well-Known Member
- Posts
- 4,884
- Location
- south east london
Replaced the os rear door lock while I had the chance.......Will it ever end ?
biketeacherdave
Well-Known Member
- Posts
- 4,884
- Location
- south east london
Repainted the roof
biketeacherdave
Well-Known Member
- Posts
- 4,884
- Location
- south east london
New bonnet lettering I was going to go for the debadged look but couldn't get all the old glue of no matter what I did so new gloss black lettering it is.
As a daily driver it's all good once you get them sorted.
As a daily driver it's all good once you get them sorted.
biketeacherdave
Well-Known Member
- Posts
- 4,884
- Location
- south east london
Revisited the supercharger today we originally fitted a solid coupler on the snout rebuild. It did introduce additional idle noise so today it got stripped again and a standard original coupler fitted.
Happy to report idle/tick over is more smooth/silent compared to the solid type.
It seems to be a well reported issue fitting a solid coupler......don't do it !! Fit a standard type.
Happy to report idle/tick over is more smooth/silent compared to the solid type.
It seems to be a well reported issue fitting a solid coupler......don't do it !! Fit a standard type.
biketeacherdave
Well-Known Member
- Posts
- 4,884
- Location
- south east london
Had my winter tyres fitted
biketeacherdave
Well-Known Member
- Posts
- 4,884
- Location
- south east london
Got it dirty
