Sport New to me 4.2 sc

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Tinting wise did you do it yourself? is it particularly difficult to do if so?

I ask but I'm tempted to put some dark tints on the rear of my p38 it looks like the fronts and I suppose presumably the back but I haven't check had a light tint as I noticed on the front passenger and drivers side there is a small circle where the tint has obviously been damaged.
 
Khemitude said:
Good to know, I'll pop that in the ever growing "would like to do one day" pile
Click to expand...
I have one of those “lists “. I did mine limo black a few years ago but unfortunately bought tint film a bit cheap and it’s started to fade so needs re-doing. Just waiting for slightly warmer outdoor temperatures.
Tricky :cool:
 
Tricky of York said:
I have one of those “lists “. I did mine limo black a few years ago but unfortunately bought tint film a bit cheap and it’s started to fade so needs re-doing. Just waiting for slightly warmer outdoor temperatures.
Tricky :cool:
Click to expand...
Maybe one of time I go and see the kids since they are in the wakefield area I should take them for a daytrip out to York and have you do mine for me ;)

Cheaping out on the film that's a typical Yorkshire man not wanting to part of with their cash.
 
200w.gif
 
In true landy fashion both front wheel bearings replaced almost no indication of an issue I checked for play recently all was good then suddenly a loud scraping noise when turning right. I replaced the offside wheel bearing as it had play in it only to find the near side had 4 to 5 mm play it had collapsed completly .
 

Attachments

  • 20230823_150246.jpg
    20230823_150246.jpg
    384.1 KB · Views: 94
  • 20230823_150253.jpg
    20230823_150253.jpg
    267.4 KB · Views: 105
Did the os lower control arm finally went in for alignment everything spot on just needed the tracking done.....going back again for that as the steering wheel is still slightly out.
 

Attachments

  • 20231125_111433.jpg
    20231125_111433.jpg
    304.4 KB · Views: 84
  • 20231125_111612.jpg
    20231125_111612.jpg
    155.2 KB · Views: 96
It's been a while since I last updated I had my mate do the front arb bushes for me in exchange for some paint correction to his little ulez purchase, I then replaced the lower steering column to finally sort out a minor steering issue.

Will be turning my attention to additional colour coding and paint correction on my sport. I picked up an old front sc grill and got some colour coded rattle cans off the bay. I fully colour coded my L322 and preferd it that way.
20240327_154143.jpg20240327_190136.jpg
 
You must log in or register to reply here.

Similar threads

M
Sport ACE bypass for RR Sport 4.2 Petrol SC
Replies
10
Views
1K
mikesavva
M
B
L322 4.2 Supercharged - What to look out for.
Replies
4
Views
2K
Tricky of York
Tricky of York
E
2008, L322, 4.2, SC- Electrical Circuit Diagram
2
Replies
24
Views
4K
pwood999
pwood999
biketeacherdave
Disco 3 (LR3) Ulez made me do it
2
Replies
28
Views
4K
biketeacherdave
biketeacherdave
Roverdrive
Greetings!
Replies
3
Views
658
brianp38dse
brianp38dse
Back
Top