Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
Above it 
New to landyzone and need advice on a V8 conversion issues
- Thread starter Tipper12
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Im in cardiff too, member of south wales land rover club as well. couple of us have v8's
My knowledge of them could be written on the dry bit of a disco carpet, but its a learning curve mate! anyway, if you do have a 3.5, or 3.9 with a 14cux ecu then gimme a shout, Ive got a ecu reader that will help when its running or not as the case maybe!!
Only reason I mentioned the club is there is some peeps there that are local to us and have the tools,facilities to give you a hand. mate. me included.
Good luck with the engine search.
My knowledge of them could be written on the dry bit of a disco carpet, but its a learning curve mate! anyway, if you do have a 3.5, or 3.9 with a 14cux ecu then gimme a shout, Ive got a ecu reader that will help when its running or not as the case maybe!!
Only reason I mentioned the club is there is some peeps there that are local to us and have the tools,facilities to give you a hand. mate. me included.
Good luck with the engine search.
muscrat
Active Member
- Posts
- 224
- Location
- south wales
Hello cox325 how is Edwin ,big Dai and crew.....
All good,mate dont wanna hijack thread or spam!! so book in the SWLRC website below and have a catch up, they on facebook too now.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
OI sheep shagers bugger orf back to the Valleys will ya..
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
Yep, same engine as mine. Although mine has the later rocker covers on but seeing as it is a 10A46382 it will be a later engine.
Next task, take off your rocker covers and find the casting number for the heads, it is in between the two valves somewhere. Will be 3 letters then 4 numbers.
Find out what that is, because if its got the old heads you really want the new heads if you're gonna strip it down.
They are not dear but are much improved!
Next task, take off your rocker covers and find the casting number for the heads, it is in between the two valves somewhere. Will be 3 letters then 4 numbers.
Find out what that is, because if its got the old heads you really want the new heads if you're gonna strip it down.
They are not dear but are much improved!
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
This thread caused me great headache but I solved it in the end.
Have a read here, this is where the info is, but the whole thread is a VERY good read...
Cheers
http://www.landyzone.co.uk/lz/2209211-post56.html
Have a read here, this is where the info is, but the whole thread is a VERY good read...
Cheers
http://www.landyzone.co.uk/lz/2209211-post56.html
