Hi All,
Got my first Landy a couple of weeks ago. In generally good condition with a few mainly internal cosmetic issues to sort. First drive was the 70 miles back home following purchase and everything went smoothly. Only small oil leak from the rear diff. As I say its a 90 van but has had a replacement chassis 9 years ago, a replacement 200tdi engine 8 years ago and a replacement td5 bulkhead 7 years ago.
Ran for two weeks with no problems but a few days ago i noticed a very dim battery light on the dash when drawing more power (headlights on). Checked battery with digital multimeter and got 12.39v not running. Pretty much the same running and with revs. Drops to 11.9 or so under heating and lights use. Then a couple of days ago it wouldn't start. Laboured effort to turn and then just a few clicks from the starter then nothing. Battery out on charge, 8 hours charge got battery back to 12.35v, back in and she started fine once again.
Is this battery or alternator? Battery seems to hold 12.3v when not connected to system.
Any suggestions welcome.
Got my first Landy a couple of weeks ago. In generally good condition with a few mainly internal cosmetic issues to sort. First drive was the 70 miles back home following purchase and everything went smoothly. Only small oil leak from the rear diff. As I say its a 90 van but has had a replacement chassis 9 years ago, a replacement 200tdi engine 8 years ago and a replacement td5 bulkhead 7 years ago.
Ran for two weeks with no problems but a few days ago i noticed a very dim battery light on the dash when drawing more power (headlights on). Checked battery with digital multimeter and got 12.39v not running. Pretty much the same running and with revs. Drops to 11.9 or so under heating and lights use. Then a couple of days ago it wouldn't start. Laboured effort to turn and then just a few clicks from the starter then nothing. Battery out on charge, 8 hours charge got battery back to 12.35v, back in and she started fine once again.
Is this battery or alternator? Battery seems to hold 12.3v when not connected to system.
Any suggestions welcome.