New member EAS problems p38

Hi a=been reading this site for over a year now, there is some really helpfull information..
Had a problems with my eas about two months ago where i was on my way to devon and had got 200 miles from manchester...
pulled in services no probs then set off on the slip road and eas hardfault came on dashboard slow 35mph max, and suspension button lit up like a christmas tree....
i have now obtained the eas unlock software on ebay and getting these following faults...
2. FR signal incorrect.
7. vehicle has moved
3. RR valve stuck open ..

please could anyone shed some light do i need to replace full valve block.. FR height sensor..
please help ??????
all air bags inflate and doesn't seem to be any leaks..

oh ive got rid of hard fault 35 mph..
it now just says eas fault...
does anyone know if i need a diaphran repair kit of ebay or any other products for the faults listed.....

Try removing and cleaning the connectors to the height sensors, worked wonders when mine went down on holiday. The valve may be stuck open due to a height sensor fault.

Thanks, ill try tomorrow

have you considered fitting springs?mine are fine an hassle free

Go to Range Rover Air Suspension repair, advice and troubleshooting by Rover Renovations. There is a full step by step guide to sorting out almost any of your problems and Dennis the owner is a regular contributor to range rover forums. He posts cheaply from the states. I've got lots of stuff from him posted here to Ireland and can heartily recommend him.
Also check out Range Rovers , another great RR forum and he is a stalwart under the user name shupack

Datatek said:

Try removing and cleaning the connectors to the height sensors, worked wonders when mine went down on holiday. The valve may be stuck open due to a height sensor fault.

Click to expand...

I have this fault come up RR valve stuck closed, would cleaning the connectors help me with this? also plugged the lead into clear the fault tried to pump the drivers side rear up off the computer and it won't raise so could the height sensor need replacing? turned the truck on to see if it will raise by itself but nothing been running for 5 mins still flashing for it to raise to normal level. when does it end with this suspsension?