Surely not a nice job. When you remove the air bags do the back part of the chassis before you install the new ones. If you want to have more room to work on the frame remove also the fue tank and you will have access to the place inside.
New Discovery Owner
- Thread starter Tomgc61
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I will be certain to check that area - be good to know it's all under control.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
If you dare ask the garage to check the state of the chassis behind the airbags when they change them, that and the pocket for the shock on the rear are great places for rust holes.
Oh, and get your EKA code.
Cheers
Oh, and get your EKA code.
Cheers
They are only a mile from me so I will hopefully have a look when they do the airbags. How do you get the EKA code?
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Local dealer should give it to you with proof of ownership free of charge.
Also find a friend who has proper diagnostics for it.
make sure the key works in the drivers door lock, as they sieze.
Cheers
Si Click
Well-Known Member
- Posts
- 1,506
- Location
- Lincolnshire
I know it is heresy around here to suggest it, but there are companies who will do this professionally and offer a guarantee to the work.
I'm planning on getting mine done either by Flatdog or Before 'n After in the next few weeks. Both will thoroughly clean the chassis inside and out, remove or stabilise any rust before applying a high quality preservative. Before 'n After also state that they do the inside of the doors and wings which is a plus.
More expensive than doing it yourself, but my logic is that if I get it done properly the first time, it will give me a solid baseline to re-do myself in the future.
I'm planning on getting mine done either by Flatdog or Before 'n After in the next few weeks. Both will thoroughly clean the chassis inside and out, remove or stabilise any rust before applying a high quality preservative. Before 'n After also state that they do the inside of the doors and wings which is a plus.
More expensive than doing it yourself, but my logic is that if I get it done properly the first time, it will give me a solid baseline to re-do myself in the future.
- Posts
- 83,282
- Location
- Embasinga stocæ
getting it done properly is always the problem.
Definitely!!! No one will care about your own vehicle as much as you do.
I will check them out. If the rust seems more extensive than I can cope with then probably a good option but do they go to the trouble of removing all surface rust with abrasives or are they just steam and pressure cleaning?
Last edited:
This is what i plan to do as well, but before i want to do the critical parts. I am sure they do a professional job but surely they will not remove parts like fuel tank or air bags. Next job for me to do the area behind the airbags and after take it for a professional treatment.
I'd suggest a search on here regarding the latter of the two firms you mention......... ( I think the former also appeared on here years ago - seemed good then ....)
IMHO and IME, the ONLY was this job will get done properly is if you do it yourself ..... ask me how I know*
(*Actually, don't.... SWMBO's D1 chassis was the victim of a supposedly high quality "underseal" , er, "treatment", which included the front swivels
)
Discodevon
Well-Known Member
- Posts
- 1,448
If you insist to use Waxoil mix it with diesel and or axle oil
Have just had this up on the ramp at the specialist workshop and it appears ok -ish. The rust that is apparent is surface and wood metal underneath. The worst area is the rear section but the rest from the rear wheels forwards is only very light. The air bag that doesn't drop appears new so not going to replace that.
What is the process for removing the fuel tank? Imagine that is a fairly lengthy task but maybe worth it if something nasty lurking behind there!Even mine was a bit better the place betwen the left side chassis and the fuel tank was quite rusty. If you want to treat (underseal) yours, remove the tank and clean that area before.
do you have oil in the transfer box? Looks too dry
Not a diffcult task. make sure that the tank is almost empty so you will not need to drain much fuel (otherwise the tank will be heavy to remove).
You will need to pull back loadspace carpet (for this you will need to remove D post trim casing) to get access to fuel pump. Disconnect it, remove and drain fuel. Then you can work under the car to disconnect hoses, remove 2 bolts and 2 nuts and lower tank.
But google this "discovery 2 fuel tank removal" and you will find videos, descriptions about it.
which rails you mean?
Similar threads
