bankz5152
Well-Known Member
- Posts
- 9,298
- Location
- South London/North Kent
So I've had the TF Big Bore +2 Dampers fitted to my 110 for the past year but in 5k miles one of the fronts has started leaking oil which is just poor. I was prepared to put up with the terrible finish but not a leaking damper. If one has gone this soon then I can't imagine the others will be that far behind.
So looking for new dampers, not entirely certain what to buy this time round all I know is I would like some +2 dampers
As for spec its a 110 DCPU, TF "medium load" springs (sits about +2"), no ARBs, Gywn Lewis cranked trailing arms with HD sliders, steering/tranny/diff/tank guards, NAS Step and will have a winch + HD bumper on the front and a full cage so I would like to keep those in mind when going for new dampers.
Driving is 70/30 on road/off road. Laning, P&Ps and that kind of thing, not so much racing etc...
Looked at the Extreme4x4 Challenge Dampers which seem decent for £47.99 a piece, but given the name quite hard to find any info about them online.
Old Man Emu is also a choice but I can't find any +2 dampers?
Bilstein B6s as well but they don't seem to do +2s either
Any other suggestions? Would Ideally like to stay below £100 a corner...
So looking for new dampers, not entirely certain what to buy this time round all I know is I would like some +2 dampers
As for spec its a 110 DCPU, TF "medium load" springs (sits about +2"), no ARBs, Gywn Lewis cranked trailing arms with HD sliders, steering/tranny/diff/tank guards, NAS Step and will have a winch + HD bumper on the front and a full cage so I would like to keep those in mind when going for new dampers.
Driving is 70/30 on road/off road. Laning, P&Ps and that kind of thing, not so much racing etc...
Looked at the Extreme4x4 Challenge Dampers which seem decent for £47.99 a piece, but given the name quite hard to find any info about them online.
Old Man Emu is also a choice but I can't find any +2 dampers?
Bilstein B6s as well but they don't seem to do +2s either
Any other suggestions? Would Ideally like to stay below £100 a corner...