neilc75
Active Member
- Posts
- 190
- Location
- Birmingham
Morning , during routine maintenance a week ago on my 82 petrol series 3 I cracked the coil and it slowly started dripping oil , up until then it had started 99% of the time on the first turn , I left it and ordered a new one (exact copy) ive put it on and now it wont start ( for info ive got a powerspark. Electric ignition ) . There are 2 wires to the + on coil ( red wires) from ignition and to distributor and then black wire to the - connector on coil . ive taken the dizzy cap off and it is turning when i briefly flick key , any ideas please , im assuming this means dizzy is working if its turning ? Rotor cap and arm are in good condition.