Murtle
Active Member
- Posts
- 267
- Location
- Near Glastonbury
Ok, so I've fitted the spacer as a first test, when undoing the two screws that hold the slave in place I could see it pushing it's self way from the clutch bell housing, so it was in there constantly pushing the clutch. However I need more than one of these spacers, they are about 1.5mm - 2mm thick, I think at least two if not three are needed. One fitted has improved things though.
Before
Spacer/gasket
After
Cheers for the help, I'd have never realised there should be a spacer/gasket in there.
![landy059.jpg](/proxy.php?image=http%3A%2F%2Fwww.merlinscc.co.uk%2FLandy%2Flandy059.jpg&hash=bf8ee3b3c6bae9f9f3fc0faa9f8734c6)
Before
![landy060.jpg](/proxy.php?image=http%3A%2F%2Fwww.merlinscc.co.uk%2FLandy%2Flandy060.jpg&hash=f3763505af351548a3013bb8c29f4b75)
Spacer/gasket
![landy061.jpg](/proxy.php?image=http%3A%2F%2Fwww.merlinscc.co.uk%2FLandy%2Flandy061.jpg&hash=4740a862677c0e2ea76de5a09268d904)
After
Cheers for the help, I'd have never realised there should be a spacer/gasket in there.