Nanocom/Hawkeye

Eagle13 · Nov 4, 2016

Sorry to be cheeky but is there anyone local to Doncaster... pontefract or Wakefield that has access to either of these and can clear my 3 amigo warning lights??? Got cash waiting to pay for it done.... al even chuck the wife in as part payment if you like lol....(joking ).... been let down twice and MOT ran out a week ago ... or even point me to a garage that does this without having your pants down .... thanks in advance people.

brian47 · Nov 4, 2016

Bare in mind that the 3 amigos are actually telling you that something might be wrong, They very rarely come on for no reason, just for the hell of it.
You're going to need somebody who can read the codes and let you know where the fault might be, then you're going to have to carry out the repair, or get someone to do it for you and then check the codes again and be sure to delete all the historic codes which might have been stored.
There are two major problems which could cause the 3 amigos; one or more faulty wheel speed sensors and/or wheel hubs, or a fault on the Shuttle Valve Switch plate or its connection inside the ABS modulator.
Clearing the lights and then guessing where the fault might be isn't the best way to approach the diagnosis.

Eagle13 · Nov 4, 2016

brian47 said:
Bare in mind that the 3 amigos are actually telling you that something might be wrong, They very rarely come on for no reason, just for the hell of it.
You're going to need somebody who can read the codes and let you know where the fault might be, then you're going to have to carry out the repair, or get someone to do it for you and then check the codes again and be sure to delete all the historic codes which might have been stored.
There are two major problems which could cause the 3 amigos; one or more faulty wheel speed sensors and/or wheel hubs, or a fault on the Shuttle Valve Switch plate or its connection inside the ABS modulator.
Clearing the lights and then guessing where the fault might be isn't the best way to approach the diagnosis.

Thanks bud .... yeah the wheel bearing had collapsed as in the photo which I'm assuming was the reason why they came on.... loud grating noise followed not long after by the 3 lights.....checked the bearings first and found this so replaced both sides .... hopefully now get it plugged in somewhere and either check that it was that that put the lights on and get them cleared.

Nanocom/Hawkeye

Eagle13

Member

brian47

Well-Known Member

Eagle13

Member

Attachments

Similar threads