P38A My suspension fix

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Retrospaceman said:
Ha No! Just got fed up chasing problems, I suspect the air tank was also on its way out. When the EAS works its fantastic, but just got to the end of my tether with it. plus the springs helped take some punishment off-roading which is why I decided to change. Had the truck been worth more and in better general mechanical condition I might of tried fixing it, plus I didn't do that many motorway miles so handling wasn't really a criteria. - As I remember though the coil conversion wasn't that expensive (Think it was a brit part lift kit) and about the same as the four air springs - this was about 4 years ago mind.
anyways they're just sitting in the shed now.
Click to expand...
Best place for them, I take it you mean the springs.;)
 
no its not complicated and dont call me a numpty no need for that you would not say that to my face i have a family to support and paying out for parts that may go wrong again i.e worn airbags valve block or compressor its far cheaper to fit springs job done no hassle
 
gazdon said:
no its not complicated and dont call me a numpty no need for that you would not say that to my face i have a family to support and paying out for parts that may go wrong again i.e worn airbags valve block or compressor its far cheaper to fit springs job done no hassle
Click to expand...
I stand corrected, yes that was uncalled for .I, personally, don't think that s*****s are the cheaper option. Check the price of a kit. Valve block O ring kit £20 ish, recon compressor £100 sorted. Don't know what the roads are like in your area but I've had to put two on the X type in the last two years. I would say that to your face by the way, I won't post anything on here that I wouldn't say to anybody personally. :)
 
its ok saying o ring kit ect and recon conpressor but the bags are at a stage that they are leaking aswell i dont use the range rover that much only at weekends to wales and back as i have my own work van as im a builder and dont go off roading so i think springs are the way to go non brainer really and you maybe a nice chap i dont know but anyone calling me a numpty with intent to my face would see the bad side of me that is very rare to see as im a very nice chap no need to call someone a numpty because they have diffrent views on what to do with there motor its a cheap knock around that i try to look after without spending stupid money on
 
gazdon said:
its ok saying o ring kit ect and recon conpressor but the bags are at a stage that they are leaking aswell i dont use the range rover that much only at weekends to wales and back as i have my own work van as im a builder and dont go off roading so i think springs are the way to go non brainer really and you maybe a nice chap i dont know but anyone calling me a numpty with intent to my face would see the bad side of me that is very rare to see as im a very nice chap no need to call someone a numpty because they have diffrent views on what to do with there motor its a cheap knock around that i try to look after without spending stupid money on
Click to expand...
Well considering your original post I was led to believe that your bags were in a good condition, why else would you put manual inflation valves on it? Springs are not a cheap option IMHO. ps, we all have a bad side.;)
 
In this case, springs are the best option.:) Try a scrappie for a cheap set from another sprung p38, there are lots of them about.;):D
 
You must log in or register to reply here.

Similar threads

K
Is my RR Classic in EAS shutdown?
Replies
12
Views
857
kevleaper
K
ar1g3
P38A Which EAS repair kit to get?
Replies
18
Views
1K
Grrrrrr
Grrrrrr
Riaan vT
Use of 2003 RR L322 Air suspension
Replies
5
Views
806
Riaan vT
Riaan vT
J
P38A p38 EAS - immediate drop of pressure
Replies
11
Views
607
Mark Piercy
Mark Piercy
M
Air suspension problems
2 3
Replies
59
Views
3K
Rubberknees
Rubberknees
Back
Top