my landrover series 3 restoration project

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Get the welder out on that chassis. For three reasons:-

You can never get enough practice with the welder.

It will maintain the originality of the vehicle and ensure you don't have issues with the registration number and the authorities, unlikely I know but it is a consideration.

If you have access to a good chassis it means another Landy with a really knackered chassis can be saved.

Good luck either way :)
 
waldershelf said:
Get the welder out on that chassis. For three reasons:-

You can never get enough practice with the welder.

It will maintain the originality of the vehicle and ensure you don't have issues with the registration number and the authorities, unlikely I know but it is a consideration.

If you have access to a good chassis it means another Landy with a really knackered chassis can be saved.

Good luck either way :)
Click to expand...
cheers but it looks good in the pictures, it is a wee nackard up close fella
 
done quiet abit today
grinded the new chassis ready for paint.

newlandrover109005.jpg


newlandrover109006.jpg


newlandrover109003.jpg


newlandrover109004.jpg


and we had a new arrival today, a rare 109 truck cab ex mod,we just bought .
 
Last edited:
done a little bit to my series 3 today, i cut the rot out of the new chassis ready to get some plate tomorrow, and cleaned all the wax oil off the chassis! ready to weld now and then painted.
 
aint done alot to my landrover recently, been busy with school work, but ive managed to weld all my new chassis up and put 4 outrigers on it and also did abit of ainting !!!
:p :)

chassisdone001.jpg


chassisdone002.jpg


chassisdone004.jpg


chassisdone005.jpg


chassisdone006.jpg


chassisdone007.jpg


chassisdone008.jpg


chassisdone009.jpg


chassisdone010.jpg


chassisdone011.jpg
 
thats the way to do it mate back it up with red oxide straight after to make sure the rust cant get back in

nice welding too keep them pics coming :D:D:D
 
You must log in or register to reply here.

Similar threads

ovalandrover
my project
Replies
6
Views
483
Mark Piercy
Mark Piercy
Rangieman123
Modern replacement for a late Series 3 petrol starter motor.
Replies
7
Views
1K
British Leyland Rover
British Leyland Rover
S
Leaking roof
Replies
9
Views
1K
boguing
boguing
Guldner
My Series 3
Replies
3
Views
600
Wildefalcon
W
CptSeries3
Advice needed about my series 3
2
Replies
21
Views
1K
dag019
dag019
Back
Top