1980 Series 3 Deisel. Please any advice is appreciated. I have spent all last night when I should of been in the pub, trying to find on the web the correct colour code for my water temperature sender on the net. The closest info I could find was for the petrol engine ( beige) The one in my landy partially works ,but is black so this doesnt mean its the correct one. Any ideas ,thank you in advance
My head hurts! please help
- Thread starter chinjey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
johnny curt 1
Well-Known Member
- Posts
- 9,118
- Location
- manchester
a couple of questions mate
1 what series is your landy
2 what wiring phase is it positive earth or negative earth
3 is it an alternator conversion or on a dynamo
1 what series is your landy
2 what wiring phase is it positive earth or negative earth
3 is it an alternator conversion or on a dynamo
johnny curt 1
Well-Known Member
- Posts
- 9,118
- Location
- manchester
its the black one for the diesel series 3 10j engine ( if its situated on top of the cylinder head between the back 2 pots
the black one has a lower heat range as diesels run a little cooler than petrols the beige one is set for higherr temperatures
hence if the one you have fitted is beige its no wonder you only have it half working
the black one has a lower heat range as diesels run a little cooler than petrols the beige one is set for higherr temperatures
hence if the one you have fitted is beige its no wonder you only have it half working
derinj
New Member
- Posts
- 33
- Location
- Maidstone, Kent
The one on our Series 3 petrol is white! What's that for?
Thank you ,I replaced it with a black one and now the temperature gauge is fine . Cheers
johnny curt 1
Well-Known Member
- Posts
- 9,118
- Location
- manchester
