My First Disco!!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

TheGavnor

New Member
Posts
13
Location
Hereford
This is my first Disco, it's standard but hoping to make some mods to it over the next few months :cool: what would be a good starting point for a newbie??!!

disco.png
 
full service,
engine oil and filter. oil flush maybe? (some folk do some dont)
10-40 semi
cooling system flush and new antifreeze. I use red antifreeze 50/50 with water
air filter.
fuel filter and drain sedimeter.
diff oils. ep90
gearbox oil. ATF
transfer box. ep90
grease all props.
timing belt and tentioner if due or last change not known.
what like are the brakes ? maybe change brake fluid ?
check glowplugs
check tyre pressures
 
Last edited:
full service,
engine oil and filter. oil flush maybe? (some folk do some dont)
10-40 semi
cooling system flush and new antifreeze. I use red antifreeze 50/50 with water
air filter.
fuel filter and drain sedimeter.
diff oils. ep90
gearbox oil. ATF
transfer box. ep90
grease all props.
timing belt and tentioner if due or last change not known.
what like are the brakes ? maybe change brake fluid ?
check glowplugs
check tyre pressures

+1

Get all these done first for mechanical piece of mind before splashing any cash on modifications.

You could spend a few hundred quid on a lift kit for example then find 20 miles later your engine packs in for lack of a good service and you'll have need for the money spent on the lift kit.
 
a good service is all that is needed but cant see why you would need to spend money on all the bolt on crap if landies dont need it if it did it would be factoy fitted :behindsofa:
 
Back
Top