JUKE179r
Well-Known Member
- Posts
- 3,166
- Location
- Suffolkshire
Check your Nanocom 1 for BCU and Hazard option:
Hazard option:
This setting configures the usage of the hazard lights by the BCU in respect of alarm usage. Available options are:
The hazards do not flash on security system arm disarm or trigger (DISABLED).
The hazards flash on security system trigger only (FITTED).
The hazards flash on security system arm, disarm and trigger (ALL).
Check your Nanocom 1 for BCU and Mislock option:
Mislock option:
The Mislock sound alerts the driver to a failed attempt to lock the vehicle. This may be because one or more of the doors, bonnet or tail door is not correctly closed or the key is inserted into the ignition (any position). A Mislock condition will enable security functions only on the parts of the system that the BCU can verify as being reliable partially armed. The audible warning of a Mislock condition depends on the hardware fitted to the vehicle and on the current setting of the alarm sounder option setting. If a Mislock condition is detected and the Mislock sound is enabled in this setting, the programmed sounder will sound for 50 ms. Furthermore the BCU will not flash the hazard lights or operate the LED in a rapid flashing state when it detects the Mislock condition.
