Had to wait for an hour for me mate to tow me in his ford ranger.... luckily he was gracious and didnt take the **** too much.i think you mean Mondo Mode.
Yeah thats what i though. Ive got yokohama geolandar a/t g015 tyres on. Ill just have to make sure my next landy acutally has all its bits intact when i buy it !!With no propshafts fitted, you're down to 1 wheel drive. Moss is slippery stuff when wet, especially if it's on smooth concrete. It'll be a combination of factors like wet moss, FWD only and possibly summer rated tyres.
Geolander 015 are good tyre in most conditions, but you obviously found one were they're not so good.Yeah thats what i though. Ive got yokohama geolandar a/t g015 tyres on. Ill just have to make sure my next landy acutally has all its bits intact when i buy it !!
Geolander 015 are good tyre in most conditions, but you obviously found one were they're not so good.
Did you know it wasn't running 4X4 when you bought it?
If the camber of the surface your driving caused a front wheel to lift slightly, then that will affect traction enough to make any tyre types completely hopeless.
It gets very very tight mateYou should have tried reversing up !
You been had mateIts a really ****ty drive its steep the tarmac is falling apart its covered in moss and its also on cliffs that are definitley eroding... I didnt know it wasnt 4 wheel drive when i bought it,i badly needed a car for work the next day and it was dirt cheap I went to view after work in the dark i had a quick look underneath and saw the VCU and stupidly assumed all of the drivechain was all there. Surprise surprise the sellers phone has been off since i bought it.
Thanks captain obvious. Have a sweetie....You been had mate
G thanks Ben DoverThanks captain obvious. Have a sweetie....
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!