Mk.1 - Were All Models 4wd?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Is there any other way to test the ird if your buying a fl1 with the props removed.
The only quick check, is to see how much play there is in the rear output flange. If it's got more than about 6mm free lash, then the IRD bearings are on the way out.
Also if it drives el mono with no noises or bangs from the diff, is the diff okay, or cant you tell untill vcu and shafts are refitted.

Normally the diff survives ok. But if it if damaged, they are cheap to buy and relatively easy to change. ;)
 
Back
Top