Misc cables engine bay

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Adventure_Coachworks

Adventure_Coachworks

Member
Posts
21
Location
Midlands
Hi all.
Found some plugs in my engine bay. Im assuming the ones clipped to the bulkhead are for the fuel burning heater but the ones under the window are a mystery. Have had a look through various wiring diagrams but would like a confirmation. Anyone done anything with them? Retrofitted the parts they are intended for. Did have a little search on here but didnt have allot of luck. TIA
IMAG0023.jpg
IMAG0024.jpg
 
+1 on the heated screen.

In the top picture, I'd say that the sounder for the alarm system might be missing too, so one of those wayward plugs might be for that, probably the one on it's own, not the two on the left of centre.
That device with the round top to the left is the emergency fuel cut-off inertia switch ..... just so you know.
Fitting a new heated screen is the sort of thing you'd need a specialist for, but once you have one fitted, you'll still need a compatible code reader to activate the system in the BCU.
 
The alarm definitely works. Found this out when the battery on my key fob went. Thanks though, ill dig through rave again and see if i can find what is meant to be plugged in there.
 
You must log in or register to reply here.

Similar threads

Naf623
Disco 2 What fixings to use for the wheel arch liners?
Replies
2
Views
565
jamesDiscoTD5
jamesDiscoTD5
B
300tdi fuse box in engine bay
Replies
4
Views
1K
Wolf Pack
W
D
How do you clean your engine and bay??
Replies
10
Views
1K
Tirran
Tirran
K
Disco 2 Disco 2 Cruise Control Not Working
Replies
13
Views
2K
DanClarke
DanClarke
Mellbell
Disco 1 Engine bay harness
Replies
2
Views
659
discool
discool
Back
Top