Hi really need a new master cylinder , but I have found a seal kit in my garage stc500090 I see some people are sell it as a master seal and a clutch seal kit. To save me swearing and wasting time ect finding out this does not fit ect, does anyone know if that the correct seal kit? It's a 1989 2.5 td
Master cylinder seal kit
- Thread starter Corrie
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
https://www.lrworkshop.com/parts/STC500090
May help.
If it was me then I'd probably replace the master and slave with new so it wouldn't need attention again for a while
May help.
If it was me then I'd probably replace the master and slave with new so it wouldn't need attention again for a while
discool
Well-Known Member
- Posts
- 13,609
Ok, we have a date and the type of engine, but not the model. So the link below gives the Land Rover models that STC500090 is suitable for.
https://www.devon4x4.com/stc500090-kit-clutch-mas-392158.html
rob1miles
Well-Known Member
- Posts
- 3,565
- Location
- Slough and Bath
If its an ally master I would not bother changing the seals as the bores wear. Works OK in cast iron as only the seals wear. You may be lucky but its annoying to strip it down and find a step in the bore.
