Wanted Manual 300tdi injection pump

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

resto_d1

Well-Known Member
Posts
3,657
Location
Wiltshire
Need a working 300tdi injector pump please (non edc). @kevstar you don’t have one in the stores do you?!

I can’t swap an edc pump for manual with the diesel specialists so need a manual to give to them for rebuild.
 
Need a working 300tdi injector pump please (non edc). @kevstar you don’t have one in the stores do you?!

I can’t swap an edc pump for manual with the diesel specialists so need a manual to give to them for rebuild.

Hey buddy I dont have one laying about, I do have a leaking pump on a 200tdi engine id need to get my timing pins
back of a mate or buy another set so I can take it off. I can call a couple of peeps tomorrow & see if theres any locally. ;)
 
Hey buddy I dont have one laying about, I do have a leaking pump on a 200tdi engine id need to get my timing pins
back of a mate or buy another set so I can take it off. I can call a couple of peeps tomorrow & see if theres any locally. ;)
You’re a gent thanks! Just trying to sort collection out with rich when we both get a chance but keen to get gathering. I’ve got the injectors here already and wanted to send off as a pack. Why I did t strip more off that old d1 I don’t know! It was a mad rush moving house!
 
You’re a gent thanks! Just trying to sort collection out with rich when we both get a chance but keen to get gathering. I’ve got the injectors here already and wanted to send off as a pack. Why I did t strip more off that old d1 I don’t know! It was a mad rush moving house!

I stripped everything off mine cause im a pikey 🤣
 
I stripped everything off mine cause im a pikey 🤣
Mate I lost loads of bits when I did that move! Atleast I didn’t lose tools which was the main thing. I think there was even a fresh inner wing in the back and also the commercial bulkhead divider. Never mind, I’m not going to cry over spilt milk!
 
Mate I lost loads of bits when I did that move! Atleast I didn’t lose tools which was the main thing. I think there was even a fresh inner wing in the back and also the commercial bulkhead divider. Never mind, I’m not going to cry over spilt milk!

Two lads got back to me only one has a pump still on the engine which he wont split, got another mate getting back to me
tomorrow.

Yer yer better having the tools than loads of bits that lay about for yonks thinking I'll use that. lol
 
I've got one. It has a boost pin and a boost ring fitted. The EGR resistor has been removed.
It works, no leaks etc, probably 90% - but could do with a checkup/reset to factory by Diesel Bob to get it 100%

£250 delivered (ONO) ?
Think I’m sorted just need to collect. I did message diesel bob. Is that the best place to get pump and injectors done? I also saw there’s bob beck. I needed a manual pump to use as an exchange for one of their refurbs
 
Mr Seed (Diesel Bob) is good, a tad expensive these days (IMO) but still good.
Bob Beck was a company in Leamington Spa (my old stomping ground) but I think it's gone bust/given up now ?
Nope still going - phoned him earlier in the week hence why I needed a manual pump as you can’t exchange the edc for manual with them 👍🏻
 
Back
Top