Manifold studs....

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tom1979

tom1979

Well-Known Member
Full Member
Posts
2,160
Location
East of England, UK
Just in the middle of changing the manifold studs. Last nut got to near 25nm and started slipping. Will it be ok to leave ? Or put another nut up to it? Or do i need to change the stud? Might be able to replace stud with manifold on really don't want to be taking it all off again!
 
tom1979 said:
Just in the middle of changing the manifold studs. Last nut got to near 25nm and started slipping. Will it be ok to leave ? Or put another nut up to it? Or do i need to change the stud? Might be able to replace stud with manifold on really don't want to be taking it all off again!
Click to expand...
you either need another nut or thread in head
 
I think the threads got damaged in that one when it warped so it's got some m10 threaded bar and a normal nut on it now
 
Last edited:
You must log in or register to reply here.

Similar threads

MacStu
Wolf style rim retrofit to 1983 110
2 3
Replies
50
Views
2K
miktdish
miktdish
dev742
Disco II TD5 Turbo flange nuts
Replies
14
Views
757
Stanleysteamer
Stanleysteamer
A
P38A Coolant in cylinder head inlet passage
Replies
5
Views
657
Eldon
E
cuschieri.jonathan@gmail.
Series 3 Perkins 4.203 exhaust manifold
Replies
0
Views
448
cuschieri.jonathan@gmail.
cuschieri.jonathan@gmail.
H
TD5 head replacement issue, tap noises
Replies
0
Views
921
harrym8
H
Back
Top