currymunster
Well-Known Member
- Posts
- 796
- Location
- Folkestone, Kent.
Okay so I'm just wanting your thoughts on fitting the manifold to down pipe gasket on 300tdi. I've always Done it on dry and wondered what every one else did??
Disco 1 Manifold gaskets
- Thread starter currymunster
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 9,105
- Location
- Roaming the UK on assignments
Holts firegum.
Just a light smear across both sides to make up for any warp or distortion.
Just a light smear across both sides to make up for any warp or distortion.
Gazbo
Well-Known Member
- Posts
- 3,949
I use a product called "Maniseal" on exhaust manifold to head and manifold to downpie on my D1 300tdi , it is a ceramic putty type stuff that does not shrink when the metal cools. Don't know if it's available over your way but I think Holts make a similar product.
sierrafery
Well-Known Member
- Posts
- 17,871
- Location
- Arad/Romania
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
dry but with a little sealant just to hold it in place whilst down pipe is fitted not for sealing use
Gazbo
Well-Known Member
- Posts
- 3,949
I use the sealant because, mainly I'm too tight to pay for new gaskets and sick of leaks when I know it can be done better, when doing top end only ever use new Head Gasket, every other gasket gets replaced with silicone or used gaskets with maniseal/silicone, no oil leaks, no gas leaks and cheaper.
I own Jap cars that use pretty exclusively silicone sealants other than critical joints and they never leak even after hundreds of thousand kilometres.
Only parts of our Disco that leak are those fitted with orig gaskets.
Similar threads
