Huddy84
Well-Known Member
- Posts
- 746
- Location
- East Anglia
Bell housing with clutch arm
Clutch pivot old vs new
Clutch pivot old vs new
Major transmission failure. Need help troubleshooting
- Thread starter Kiteboarder Ken
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Kiteboarder Ken
Member
- Posts
- 18
- Location
- Tampa Florida
Update, I took off the PTO cover from transfer case and it looks like mud around the output shaft. Very nice indeed. Lots of play there for sure. It is a LT77 tranny. Should I get a rebuilt one or give it a go and try to overhaul this one? Any advice on a reputable source for a transmission. Will I need to change out the transfer case as well or just change the input gear and necessary bearings? I curse that Englishman that told me this would be trouble free for years to come! That guy is still jumping up and down clicking his heals together. I especially love the paint over rust and dirt. Ya'll got me good on this one-lesson learned. Thanks again for any assistance chaps, blokes, gentlemen, noblemen, or any other term appropriate- I really do appreciate the advice. Links to videos or old posts earns you a pint when you come over to the states. You still on lockdown??
Attachments
tottot
Well-Known Member
- Posts
- 8,108
- Location
- west wales coast
You can pull the gear out now and have a proper look at the splines on shaft and gear. Usual to just replace input gear for the transfer box, replacing mainshaft in gearbox is more of a job, Most fit a rebuilt box. Still in lockdown.
Rougharse Racing
Well-Known Member
- Posts
- 883
- Location
- The Grim North
It doesn't look good there, but have you cleared the crap away and confirmed that it has failed?
When you get your gearbox repaired, you can get a modification that drips oil into that area.
Google Ashcroft Transmissions to get an idea of the parts.
https://www.ashcroft-transmissions.co.uk/diy-rebuild-kits/lt230-rebuild-kits/oil-feed-plate.html
When you get your gearbox repaired, you can get a modification that drips oil into that area.
Google Ashcroft Transmissions to get an idea of the parts.
https://www.ashcroft-transmissions.co.uk/diy-rebuild-kits/lt230-rebuild-kits/oil-feed-plate.html
- Posts
- 1,205
- Location
- The Flat lands of Cambridgeshire
Let me know @Kiteboarder Ken if you need some more pages of RAVE posting
probably best to google RAVE.iso and download it so you have a copy.
probably best to google RAVE.iso and download it so you have a copy.
payydg
Well-Known Member
- Posts
- 3,907
- Location
- Aberdeenshire
To be pedantic the tranny is an LT230 and the gear box is a LT77.
Take the gear out and look. You can rebuild the transfer box yourself - will need a DTI gauge and a press and a rebuild kit from Ashcroft
you won’t be able to do the gear box yourself.
payydg
Well-Known Member
- Posts
- 3,907
- Location
- Aberdeenshire
YouTube channel called britanica restoration and another called trailer fitters tool box both have excellent videos coving all that’s been mentioned.
As said by other the next thing to do now is pull the input gear out and see what the internal splines look like on it and the gearbox output shaft. I would second the previous comments about being able to rebuild the transfer box yourself. But I would suggest it is unlikely to be that actual box. The input gear can be replaced on its own (make sure you get a cross drilled version). But if the gearbox output shaft splines are worn you are looking at a reconditioned box.
