major major major major chassis repair (major) :)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
last weekend I was repairing a split in my chassis behind the front bump stop. Welding upside down laying on the floor I had a bit of weld go in my ear. Good job I was sweating a bit, I heard it sizzle near my ear drum for a second or two before I managed to let it run out. I wear ear plugs when I'm welding now. I think that could be a nasty injury.
 
Locky1978 said:
last weekend I was repairing a split in my chassis behind the front bump stop. Welding upside down laying on the floor I had a bit of weld go in my ear. Good job I was sweating a bit, I heard it sizzle near my ear drum for a second or two before I managed to let it run out. I wear ear plugs when I'm welding now. I think that could be a nasty injury.
Click to expand...
Been close to that a lot of times.I've got hairy ears (no rude remarks please) & i hear the hair crackling in there sometimes. One of the blokes at work was cutting overhead (oxy)& a large blob of molten metal went down his neck. He leaned forward to try to minimise burns & it ran down into his trousers & lodged in his underpants causing a very nasty burn on his scrotem.(he did a very amusing dance) The most embarasing bit was getting it bandaged in the medical by the nurse.
 
the ideal work yes but its a museum piece so costs have to be down and the chassis has had quite a few mods for the recce gun mounts and extra fuel tank outriggers etc etc
 
You must log in or register to reply here.

Similar threads

S
richards chassis & pre-drilled holes for steps
Replies
1
Views
487
hughdavies
H
B
bulkhead
Replies
7
Views
901
Dauphproto
D
D
Disco 2 1/2 chassis replacement.
Replies
19
Views
2K
Daviehilltown
D
jimllshiftit
Any advice for novice welder about to stitch new rear cross member to 90 chassis?
Replies
3
Views
1K
tottot
tottot
S
rear axle holes
Replies
9
Views
1K
Wildefalcon
W
Back
Top