M62 VANOS REMOVAL TOOL?

jimmacD · Saturday at 22:56

Hiya Peeps!

Back on again!
I want to remove, clean or replace my Vanos solenoids. Question is, where do I get the deep reach 32mm socket from, BMW dealers etc.. or modify a deep reach off evilbay? Any help would be great.

biketeacherdave · Saturday at 23:25

I had to ream the vanos removal socket out a tad that came with the timing kit I bought off the bay so be warned.

jimmacD · Sunday at 00:53

biketeacherdave said:
I had to ream the vanos removal socket out a tad that came with the timing kit I bought off the bay so be warned.

Don't suppose you still have that socket?

biketeacherdave · Sunday at 13:02

Afraid not but if your carefull a pair of pump pliers should wind them out and none of the ebay or amazon vanos valves actually fit been there done it. So a clean is all you should do

jimmacD · Sunday at 20:41

biketeacherdave said:
Afraid not but if your carefull a pair of pump pliers should wind them out and none of the ebay or amazon vanos valves actually fit been there done it. So a clean is all you should do

What are pump pliers? Chap on full fat suggests a 32mm plumbers box spanner? The Evilbay prices for solenoids do seem very cheap compared to thems from stealers/specialists? Will test the solenoids ohms and hopefully get away with a good clean?

biketeacherdave · Sunday at 21:07

32mm plumbers box spanner will do it or pump pliers

https://www.screwfix.com/p/stanley-fatmax-push-lock-groove-joint-pliers-12-305mm-/25268

Saint.V8 · 2024-11-21T20:21:31+0000

Can't remember if my timing kit came with the socket - been ages since I looked at it.

M62 VANOS REMOVAL TOOL?

jimmacD

Well-Known Member

biketeacherdave

Well-Known Member

jimmacD

Well-Known Member

biketeacherdave

Well-Known Member

jimmacD

Well-Known Member

biketeacherdave

Well-Known Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Similar threads